Experimental and Numerical Investigation of Mechanical and Modal Behavior of Hybrid Fiber Metal Laminates for Aerospace Applications
- 13 February 2026
- journal article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (16)
Abstract
This study examines the tensile, axial compression (buckling), flexural, and modal behavior of three aerospace‐grade fiber metal laminates (FMLs): GLARE, CARALL, and a newly developed hybrid laminate (C‐GLARE). All laminates were fabricated using a wet lay‐up process, and their mechanical performance was evaluated following standard testing procedures. Modal characteristics were obtained under cantilever and simply supported boundary conditions, and the results were validated through finite element simulations. The hybrid C‐GLARE laminate exhibited improved damping capacity and flexural strength compared to CARALL, particularly in the 0° fiber orientation. Among the laminates, GLARE showed the highest damping ratio, followed by C‐GLARE and CARALL. The lower lateral tensile performance of carbon/epoxy, as observed in CARALL, was consistent with the experimental findings. Simply supported specimens demonstrated higher natural frequencies due to increased boundary restraint. Overall, the C‐GLARE laminate displayed superior combined mechanical and dynamic performance, indicating its potential suitability for aerospace structural applications, especially in upper fuselage components requiring enhanced strength and vibration damping.Keywords
This publication has 21 references indexed in Scilit:
- Experimental, Numerical, and ANN-Based Study of Free Vibration of Glass Fibre and MWCNT-Reinforced Laminated StructuresFibers and Polymers, 2025
- Flexural and dynamic characterization of carbon/basalt hybrid laminated composite sandwich plates with PET foam core: A numerical and experimental approachStructures, 2025
- Silane‐treated kapok fiber/epoxy composites for aerospace cabin interiors: Synthesis and characterizationPolymer Composites, 2024
- Comprehensive evaluation of the mechanical and electrical properties of dewaxed kapok fibre-reinforced polymer composites for potential application in printed circuit boardsIndustrial Crops and Products, 2024
- Dynamic buckling of magnetorheological fluid integrated by visco-piezo-GPL reinforced platesInternational Journal of Mechanical Sciences, 2018
- Low-velocity impact response of fibre–metal laminates – Experimental and finite element analysisComposites Science and Technology, 2012
- Evaluation of the half‐power bandwidth method to estimate damping in systems without real modesEarthquake Engineering & Structural Dynamics, 2010
- EXPERIMENTAL AND THEORETICAL INVESTIGATION OF THE LINEAR AND NON-LINEAR DYNAMIC BEHAVIOUR OF A GLARE 3 HYBRID COMPOSITE PANELJournal of Sound and Vibration, 2002
- Finite element procedure for modelling fibre metal laminatesComposite Structures, 1995
- Fibre-metal laminatesRecent developments and applicationsInternational Journal of Fatigue, 1994