Taguchi optimization of geopolymer concrete produced with rice husk ash and ceramic dust
Authors:
- 11 October 2021
- journal article
- research article
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 29 (11) , 15876-15895
Abstract
Metakaolin, fly ash, and mostly granulated blast furnace slag (GBFS) are traditionally used in the production of geopolymer. This study, adding to the knowledge base on geopolymer concretes as an alternative to cement mixtures, explored an experimental approach that investigates the use of ceramic dust (CD) and rice husk ash (RHA) with high SiO content instead of GBFS in the production of geopolymers. For this purpose, instead of GBFS, RHA at proportions of 0, 5%, 10%, and 15% and CD at proportions of 0, 10%, 20%, and 30% were used in the production of geopolymer concrete. In addition, groups were determined with a Taguchi L16 matrix with NaOH (an important material in geopolymer production) at 12, 14, 16, and 18 molality. Varying combinations of flow diameter, density, porosity, and water absorption rate were used, and their performance under high temperatures in terms of compressive strength was evaluated. The use of RHA in geopolymer concretes produced using CD and RHA had a negative effect on the flow and water absorption rates. However, the use of CD had a positive effect, and geopolymer concretes with high density and porosity were obtained. In addition, it was determined that strengths > 70 MPa could only be obtained if 5–20% CD were used at 14–16 molality. The resistance of geopolymer concretes to high temperatures is lower than normal concretes. However, when comparing RHA and CD, it was determined that the use of CD would be more effective on geopolymer materials, and special measures should be taken at temperatures > 450 °C. Graphıcal abstractKeywords
This publication has 82 references indexed in Scilit:
- Use of increasing amounts of bagasse ash waste to produce self-compacting concrete by adding limestone powder wasteJournal of Cleaner Production, 2013
- Compressive strength of ash-based geopolymers at early ages designed by Taguchi methodMaterials & Design (1980-2015), 2012
- Properties of fly ash geopolymer concrete designed by Taguchi methodMaterials & Design (1980-2015), 2012
- Pozzolanic activity of feedlot biomass (cattle manure) ashConstruction and Building Materials, 2012
- An environmental evaluation of geopolymer based concrete production: reviewing current research trendsJournal of Cleaner Production, 2011
- The implementation of wood waste ash as a partial cement replacement material in the production of structural grade concrete and mortar: An overviewResources, Conservation and Recycling, 2011
- Alkali-activated fly ash-based geopolymers with zeolite or bentonite as additivesCement and Concrete Composites, 2009
- Development of corn cob ash blended cementConstruction and Building Materials, 2009
- Evaluation of bagasse ash as supplementary cementitious materialCement and Concrete Composites, 2007
- Replacing Cattle Manure Ash as Cement into ConcreteJournal of Applied Sciences, 2006