Influence of Vanadium Microalloying on Deformation-Induced Pearlite Transformation of Eutectoid Steel
Open Access
Abstract
In order to investigate the influence of vanadium microalloying on deformation-induced pearlite transformation (DIPT) of eutectoid steel, thermomechanical simulation tests were carried out in this study. The following four compositions of vanadium microalloying were applied in the tests: vanadium free in Steel A, vanadium content of 0.1 mass% in Steel B, vanadium content of 0.27 mass% in Steel C, and vanadium content of 0.1 mass% with the addition of 0.02 mass% N in Steel D. The dissolution of vanadium and precipitation of vanadium carbides, nitrides, or carbonitrides and the effect of vanadium microalloying on the fraction and morphology of deformation-induced pearlite for different magnitudes of strain were examined, and the mechanism of the effect was elucidated. The results revealed that DIPT could be significantly improved by vanadium microalloying with the addition of N but decreased and postponed without the addition of N because vanadium nitrides or carbonitrides were precipitated in austenite under a small strain and facilitated the nucleation of pearlite both along the boundary of austenite grain (AG pearlite) and intragranular (IG pearlite). Moreover, transformation kinetics of DIPT was fitted and compared. The results further revealed that the rate of DIPT in vanadium-microalloyed steel with the addition of N was twice as fast as that in the vanadium-free steel. In order to ensure the complete spheroidization of lamellar cementites in vanadium-microalloyed steel, a comparison of the morphology of cementites revealed that a greater magnitude of strain was required.Keywords
This publication has 32 references indexed in Scilit:
- Effect of Cyclic Annealing on Microstructure and Mechanical Properties of Medium Carbon SteelJournal of Iron and Steel Research International, 2016
- Effect of Subcritical Annealing Temperature on Microstructure and Mechanical Properties of SCM435 SteelJournal of Iron and Steel Research International, 2015
- Warm deformation processing maps for the plain eutectoid steelsJournal of Alloys and Compounds, 2015
- Influence of Initial Microstructure on Warm Deformation Processability and Microstructure of an Ultrahigh Carbon SteelJournal of Iron and Steel Research International, 2014
- Effects of Plastic Warm Deformation on Cementite Spheroidization of a Eutectoid SteelJournal of Iron and Steel Research International, 2012
- Influence of thermomechanical treatment and alloying on the properties of high-carbon wire rodSteel in Translation, 2010
- Mechanism of Austenite Evolution During Deformation of Ultra-High Carbon SteelJournal of Iron and Steel Research International, 2008
- Microstructure Evolution of a Pearlitic Steel during Hot Deformation of Undercooled Austenite and Subsequent AnnealingMetallurgical and Materials Transactions A, 2008
- Production of high-quality wire rodSteel in Translation, 2007
- The Effect of Chemistry on the Formation of Ultrafine Ferrite in Steel.ISIJ International, 1999