Microstructure Evolution During Sintering of Sodium Niobate
Authors:
- 2 August 2011
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 94 (12) , 4174-4178
Abstract
A detailed study of the macroscopic and microscopic behavior upon sintering of sodium niobate was carried out. A dynamic sintering curve, recorded at a constant heating rate of 5°C/min up to 1412°C, supported by the microstructural analysis of the samples, quenched at selected temperatures, revealed a multiple‐stage densification. This was connected with the activation of different material‐transport mechanisms: evaporation/condensation and surface diffusion up to 950°C, and other diffusion mechanisms, which contribute to both shrinkage and grain growth at higher temperatures. The second series of quenching experiments was used to track the microstructure development during the isothermal heating stage of the sintering process at 1350°C. The change from a fine‐grained microstructure, with an average grain size of 2.53 ± 1.1 μm, to a coarse‐grained microstructure, with an average grain size of 35.6 ± 32 μm occurred after isothermal sintering for 30 min. The first entrapped pores within the large grains of several 10 μm indicated the increased grain‐boundary migration velocity already after 15 min of sintering. These conditions were identified as the onset point for abnormal grain growth in sodium niobate.Keywords
This publication has 21 references indexed in Scilit:
- Perspective on the Development of Lead‐free PiezoceramicsJournal of the American Ceramic Society, 2009
- Lead-free piezoelectric ceramics: Alternatives for PZT?Journal of Electroceramics, 2007
- Electron Microscopy Studies of Potassium Sodium Niobate CeramicsMicroscopy and Microanalysis, 2005
- Alkaline-earth doping in (K,Na)NbO3 based piezoceramicsJournal of the European Ceramic Society, 2005
- Ferroelectric NaNbO3Ceramics Fabricated by Spark Plasma SinteringJapanese Journal of Applied Physics, 2003
- Hot pressing of sodium lithium niobate ceramics with perovskite-type structuresFerroelectrics, 1976
- On activated sintering and electrical properties of NaKNbO3Materials Research Bulletin, 1975
- Hot Pressing of Potassium‐Sodium NiobatesJournal of the American Ceramic Society, 1962
- Piezoelectric and Dielectric Properties of Ceramics in the System Potassium—Sodium NiobateJournal of the American Ceramic Society, 1959
- Dielectric Properties and Phase Transitions of NaNband (Na,K)NbPhysical Review B, 1954