Optimal DG Sizing and Location in Modern Power Grids using PEVs Load Demand Probability
Open Access
- 9 September 2019
- journal article
- Published by ECTI in ECTI Transactions on Electrical Engineering, Electronics, and Communications
- Vol. 17 (1) , 51-59
Abstract
The integration of plug-in electric vehicles (PEVs) to the conventional distribution system has had a major impact upon consumption of energy in the past year. This paper presents optimal distributed generator (DG) sizing and location in the power system using PEVs load demand probability. The MATLAB m-file scripts and OpenDSS were applied to solve the proposed study by varying the percentage penetration level of PEVs. A genetic algorithm optimization technique was used to find the best solution of DG installation. The simulation results showed thatthe PEVs were directly connected to the power grid with 100 PEVs (13.84%), 200 PEVs (27.68%) and 500 PEVs (69.19%), respectively. It was found that the DG sizing also varied with 1.773 MW, 1.663 MW and 1.996 MW, respectively. While the position of the DG also changes according to the sizing of DG. The position of DG was installed at bus No.738, bus No.741 and bus No.711, respectively. Therefore, the optimal DG placement helped to improve and reduce the total line loss and total energy demand from the power grid. The grid increased the power system stability and reduced the impact from the large scale of PEV penetration.Keywords
This publication has 13 references indexed in Scilit:
- Assessing Increased Flexibility of Energy Storage and Demand Response to Accommodate a High Penetration of Renewable Energy SourcesIEEE Transactions on Sustainable Energy, 2018
- Impact of Optimum Allocation of Renewable Distributed Generations on Distribution Networks Based on Different Optimization AlgorithmsEnergies, 2018
- Impact of Electric Vehicle Charging Station Load on Distribution NetworkEnergies, 2018
- Optimally Allocation of Distributed Generators in Three-Phase Unbalanced Distribution NetworkEnergy Procedia, 2017
- Probabilistic Modeling of Electric Vehicle Charging Pattern Associated with Residential Load for Voltage Unbalance AssessmentEnergies, 2017
- Impact of electric vehicle fast charging on power system voltage stabilityInternational Journal of Electrical Power & Energy Systems, 2014
- A new approach for optimum DG placement and sizing based on voltage stability maximization and minimization of power lossesEnergy Conversion and Management, 2013
- Estimating the Impact of Electric Vehicle Smart Charging on Distribution Transformer AgingIEEE Transactions on Smart Grid, 2012
- Low-Voltage Transformer Loss-of-Life Assessments for a High Penetration of Plug-In Hybrid Electric Vehicles (PHEVs)IEEE Transactions on Power Delivery, 2012
- Reconfiguration and Capacitor Placement Simultaneously for Energy Loss Reduction Based on an Improved Reconfiguration MethodIEEE Transactions on Power Systems, 2011