Grain refinement in coarse-grained 7475 Al alloy during severe hot forging
Authors:
- 11 April 2005
- journal article
- research article
- Published by Taylor & Francis in Philosophical Magazine
- Vol. 85 (11) , 1159-1175
Abstract
Grain refinement taking place in a coarse-grained 7475 Al alloy was studied in multidirectional compression at 490°C and at a strain rate of 3 × 10−4 s−1. The integrated flow curve displays significant work softening just after yielding and an apparent steady-state plastic flow at high strains. The structural changes are characterized by the development of deformation or microshear bands in coarse-grain interiors, followed by homogeneous evolution of new grains at high strains. The new grains are considered to be developed by a kind of continuous reaction through grain fragmentation that is similar to continuous dynamic recrystallization (cDRX). The mechanism of fine grain production and the factors controlling grain refinement during hot multidirectional deformation are discussed in detail.Keywords
This publication has 25 references indexed in Scilit:
- Microstructures of Nickel Deformed by High Pressure Torsion to High StrainsMaterials Science Forum, 2003
- Dynamic Evolution of New Grains in Magnesium Alloy AZ31 during Hot DeformationMATERIALS TRANSACTIONS, 2003
- Production of ultra-fine grain microstructures in Al–Mg alloys by coventional rollingActa Materialia, 2002
- Continuous Dynamic Recrystallization in a Superplastic 7075 Aluminum AlloyMATERIALS TRANSACTIONS, 2002
- Low-temperature superplasticity of titanium aluminidesMaterials Science and Engineering: A, 2001
- Bulk nanostructured materials from severe plastic deformationProgress in Materials Science, 2000
- Developing stable fine–grain microstructures by large strain deformationPhilosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 1999
- Grain Refinement under Multiple Warm Deformation in 304 Type Austenitic Stainless Steel.ISIJ International, 1999
- Microstructural evolution in Al deformed to strains of 60 at 400°CScripta Metallurgica, 1985
- SECOND PAPER ON STATISTICS ASSOCIATED WITH THE RANDOM DISORIENTATION OF CUBESBiometrika, 1958