The Dependence of Transverse Cracking and Delamination on Ply Thickness in Graphite/Epoxy Laminates
Authors:
- 1 January 1982
- book chapter
- Published by ASTM International
- p. 118-139
Abstract
(25/-25/90n)s, n = 1/2, 1, 2, 3, 4, 6, 8, and (252/-252/902)s T300/934 graphite/epoxy laminate coupons were tested in tension and examined periodically by di-iodobutane (DIB) enhanced X-radiography following progressively larger increments of applied load. The tensile strain required to initiate transverse cracking in the 90-deg ply was found to depend on the thickness of the 90-deg layer. For n ≤ 3 delamination was initiated at the edge of the coupon. The onset of delamination occurred before or after transverse cracking, depending on the laminate construction. For n ≥ 4 delamination at the 25/90 interface was initiated across the entire width of the coupon by the formation of a transverse crack in the 90-deg ply. In some laminate constructions the location of specimen separation during final fracture was associated with the growth and coalescence of edge delaminations under either incrementally increasing or constant strain cyclic loading. Comparisons of experiments to the fracture sequence predictions by stress and energy analysis are made to assess our ability to account for the ply thickness dependence of fracture in these laminates.Keywords
This publication has 9 references indexed in Scilit:
- An Analytical and Experimental Investigation of Edge Delamination in Composite Laminates1980
- THE MECHANISMS OF INITIATION AND DEVELOPMENT OF DAMAGE IN MULTI-AXIAL FIBRE-REINFORCED PLASTICS LAMINATES1980
- Initiation and Growth of Transverse Cracks and Edge Delamination in Composite Laminates Part 2. Experimental CorrelationJournal of Composite Materials, 1980
- Initiation and Growth of Transverse Cracks and Edge Delamination in Composite Laminates Part 1. An Energy MethodJournal of Composite Materials, 1980
- On multiple transverse cracking in glass fibre epoxy cross-ply laminatesJournal of Materials Science, 1978
- Investigation of Angle-Ply Delamination Specimen For Interlaminar Strength TestJournal of Composite Materials, 1978
- Constrained cracking in glass fibre-reinforced epoxy cross-ply laminatesJournal of Materials Science, 1978
- Some New Results on Edge Effect in Symmetric Composite LaminatesJournal of Composite Materials, 1977
- Some observations on the interlaminar strength of composite laminatesInternational Journal of Mechanical Sciences, 1973