Pre-Recycling Material Analysis of NMC Lithium-Ion Battery Cells from Electric Vehicles
Open Access
Abstract
Environmental concerns push for a reduction in greenhouse gas emissions and technologies with a low carbon footprint. In the transportation sector, this drives the transition toward electric vehicles (EVs), which are nowadays mainly based on lithium-ion batteries (LIBs). As the number of produced EVs is rapidly growing, a large amount of waste batteries is expected in the future. Recycling seems to be one of the most promising end-of-life (EOL) methods; it reduces raw material consumption in battery production and the environmental burden. Thus, this work introduces a comprehensive pre-recycling material characterization of waste nickel-manganese-cobalt (NMC) LIB cells from a fully electric battery electric vehicle (BEV), which represents a basis for cost-effective and environmentally friendly recycling focusing on the efficiency of the implemented technique. The composition of the NCM 622 battery cell was determined; it included a LiNi0.6Co0.2Mn0.2O2 spinel on a 15 μm Al-based current collector (cathode), a graphite layer on 60 μm copper foil (anode), 25 μm PE/PVDF polymer separator, and a LiPF6 salt electrolyte with a 1:3 ratio in primary solvents DMC and DEC. The performed research was based on a series of X-ray, infrared (IR) measurements, gas chromatography–mass spectrometry (GC-MS), and inductively coupled plasma–optical emission spectrometry (ICP-OES) characterization of an aqueous solution with dissolved electrolytes. These results will be used in subsequent works devoted to optimizing the most suitable recycling technique considering the environmental and economic perspectives.Keywords
This publication has 41 references indexed in Scilit:
- Lithium-Ion Batteries, How to Generate Value Out of End of Life Mobile Units2019
- Lithium-ion batteries: outlook on present, future, and hybridized technologiesJournal of Materials Chemistry A, 2019
- Recycling Strategies for Spent Li-Ion Battery Mixed CathodesACS Energy Letters, 2018
- Passivation behaviour of aluminium current collector in ionic liquid alkyl carbonate (hybrid) electrolytesnpj Materials Degradation, 2018
- CO2 emissions associated with electric vehicle charging: The impact of electricity generation mix, charging infrastructure availability and vehicle typeThe Electricity Journal, 2016
- Driving rural energy access: a second-life application for electric-vehicle batteriesEnvironmental Research Letters, 2014
- Electrolyte materials - Issues and challengesAIP Conference Proceedings, 2014
- Material review of Li ion battery separatorsAIP Conference Proceedings, 2014
- Anodes – Materials for negative electrodes in electrochemical energy technologyAIP Conference Proceedings, 2014
- Progress in electrical energy storage system: A critical reviewProgress in Natural Science: Materials International, 2009