Dry reforming of model-biogas over ceria-supported nickel catalyst: the effect of charge enhanced dry impregnation on the catalytic performance and coke resistance
Open Access
- 13 August 2024
- journal article
- research article
- Published by Springer Nature in Research on Chemical Intermediates
- Vol. 50 (9) , 4175-4198
Abstract
In this study, we investigated the effectiveness of charge charge-enhanced dry impregnation (CEDI) method on a ceria-supported nickel-based catalyst (10Ni/CeO2) used to produce synthesis (syngas) under biogas dry reforming conditions. The CEDI method was used to enhance the electrostatic adsorption of nickel precursor onto the ceria support during dry impregnation (DI), hence charge-enhanced dry impregnation. The other ceria-supported nickel-based catalyst (labelled 10Ni/CeO2-DI) was prepared by the commonly used DI method and used as the reference catalyst. The catalysts were then tested for stability and catalytic performance (biogas conversion and syngas yield) under biogas reforming conditions using CatLab-QGA equipment supplied by Hidden Analytical. The characterisation studies: X-ray diffraction (XRD), N2 adsorption/desorption, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), oxygen temperature programmed oxidation (O2-TPO), temperature programmed reduction (TPR), and H2-chemisorption were performed on the fresh and spent catalysts to gain insight into the influence of the CEDI method on dispersion, nanoparticles size of the active phase, metal-support interaction, bulk composition, and phase composition. The results showed that enhancing electrostatic attraction during the DI method produced 10Ni/CeO2-CEDI with smaller nanoparticles (3.33 nm), improved nickel dispersion from 1.40 to 5.04% and improved metal-support interaction inferred from TPR values increased from 290 to 340 °C. These favourable physicochemical properties had a positive correlation with the improvement in the conversion of model biogas feed and the least coke formation.Keywords
Funding Information
- University of South Africa
- University of South Africa
This publication has 41 references indexed in Scilit:
- Enhancing catalytic performance, coke resistance, and stability with strontium-promoted Ni/WO3-ZrO2 catalysts for methane dry reformingResearch on Chemical Intermediates, 2024
- Effects of MgO on Ni/Al2O3 catalysts for CO2 reforming of methane to syngasResearch on Chemical Intermediates, 2023
- Surface charge control of hierarchical ceria/silica hybrid shells for enhanced dispersion stabilityApplied Surface Science, 2022
- Green hydrogen production plants via biogas steam and autothermal reforming processes: energy and exergy analysesApplied Energy, 2020
- Engineering oxygen vacancies and nickel dispersion on CeO2 by Pr doping for highly stable ethanol steam reformingApplied Catalysis B: Environment and Energy, 2019
- Dry reforming of methane over Ni/La2O3 nanorod catalysts with stabilized Ni nanoparticlesApplied Catalysis B: Environment and Energy, 2017
- A Review of Preparation Methods for Supported Metal Catalysts2017
- Effect of support surface on methane dry-reforming catalyst preparationCatalysis Today, 2013
- Hydrogen production by water–gas shift reaction over bimetallic Cu–Ni catalysts supported on La-doped mesoporous ceriaApplied Catalysis A: General, 2010
- The stoichiometry of hydrogen and carbon monoxide chemisorption on alumina- and silica-supported nickelJournal of Catalysis, 1980