Ion beam nitriding of single and polycrystalline austenitic stainless steel
Authors:
- 7 April 2005
- journal article
- conference paper
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 97 (8) , 083531
Abstract
Polycrystalline and single crystalline [orientations (001) and (011)] AISI 316L austenitic stainless steel was implanted at 400 °C with 1.2 keV nitrogen ions using a high current density of . The nitrogen distribution profiles were determined using nuclear reaction analysis (NRA). The structure of nitrided polycrystalline stainless steel samples was analyzed using glancing incidence and symmetric x-ray diffraction (XRD) while the structure of the nitrided single crystalline stainless steel samples was analyzed using x-ray diffraction mapping of the reciprocal space. For identical treatment conditions, it is observed that the nitrogen penetration depth is larger for the polycrystalline samples than for the single crystalline ones. The nitrogen penetration depth depends on the orientation, the being more preferential for nitrogen diffusion than . In both type of samples, XRD analysis shows the presence of the phase usually called “expanded” austenite or phase. The lattice expansion depends on the crystallographic plane family, the (001) planes showing an anomalously large expansion. The reciprocal lattice maps of the nitrided single crystalline stainless steel demonstrate that during nitriding lattice rotation takes place simultaneously with lattice expansion. The analysis of the results based on the presence of stacking faults, residual compressive stress induced by the lattice expansion, and nitrogen concentration gradient indicates that the average lattice parameter increases with the nitrided layer depth. A possible explanation of the anomalous expansion of the (001) planes is presented, which is based on the combination of faster nitriding rate in the (001) oriented grains and the role of stacking faults and compressive stress.
Keywords
This publication has 52 references indexed in Scilit:
- On the crystallographic structure of S-phaseScripta Materialia, 2004
- Improved nitridation efficiency and mechanical property of stainless steel surface after N2–H2 plasma nitridation at low temperatureMaterials Letters, 2002
- On the mechanism of ion nitriding of an austenitic stainless steelSurface and Coatings Technology, 2001
- The metastable m phase layer on ion-nitrided austenitic stainless steelsSurface and Coatings Technology, 1999
- Lattice strain evolution during uniaxial tensile loading of stainless steelMaterials Science and Engineering: A, 1999
- The Low-Pressure Rf Plasma as a Medium for Nitriding Iron and SteelJapanese Journal of Applied Physics, 1997
- Phase and composition depth distribution analyses of low energy, high flux N implanted stainless steelJournal of Applied Physics, 1995
- The Effects of Low-Energy-Nitrogen-Ion Implantation on the Tribological and Microstructural Characteristics of AISI 304 Stainless SteelJournal of Tribology, 1994
- Properties of sputtered stainless steel-nitrogen coatings and structural analogy with low temperature plasma nitrided layers of austenitic steelsMaterials Science and Engineering: A, 1991
- Solid solution strengthening of stainless steel surface layers by rapid, high-dose, elevated temperature nitrogen ion implantationMaterials Letters, 1990