Microstructures, properties, and applications of laser sintered 17‐4PH stainless steel
Authors:
- 9 February 2019
- journal article
- research article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 102 (9) , 5679-5690
Abstract
The effects of hot isostatic pressing (HIP) on the densification, mechanical properties, and microstructures of laser‐powder bed fusion (L‐PBF) 17‐4 PH stainless steel parts were studied using gas‐ and water‐atomized powders. The % theoretical density, ultimate tensile strength, yield strength, elongation, and hardness of as‐printed and HIP‐ed L‐PBF parts were sensitive to energy density and starting powder shape, size, and type. At low‐energy densities of 64 and 80 J/mm 3 , densification was significant for water‐atomized L‐PBF parts when subjected to HIP treatment and density increased from 90% to 97%. For all the energy densities, the gas‐atomized L‐PBF parts after the HIP treatment showed significantly higher tensile strength, yield strength, and hardness when compared to water‐atomized L‐PBF parts properties. At low‐energy densities of 64 and 80 J/mm 3 , long columnar grains in the as‐printed L‐PBF parts did not change significantly after the HIP treatment whereas the columnar grains present in as‐printed gas‐atomized L‐PBF parts completely disappeared when subjected to HIP treatment. However, at high‐energy densities of 84 and 104 J/mm 3 , the columnar grains in as‐printed L‐PBF gas‐ and water‐atomized L‐PBF parts were changed to equiaxed grains and showed a higher level of homogenization when subjected to HIP treatment. This variation in grains and grain size had significantly affected the yield strength and elongation of HIP‐treated gas‐ and water‐atomized L‐PBF parts.Keywords
Funding Information
- Walmart Foundation
This publication has 29 references indexed in Scilit:
- Porosity control in 316L stainless steel using cold and hot isostatic pressingMaterials & Design, 2018
- Effect of scan strategy on density and metallurgical properties of 17-4PH parts printed by Selective Laser Melting (SLM)Journal of Materials Processing Technology, 2017
- Corrosion behavior of 316L austenitic steel processed by selective laser melting, hot‐isostatic pressing, and castingMaterials and Corrosion, 2017
- Hot isostatic pressing of IN718 components manufactured by selective laser meltingAdditive Manufacturing, 2017
- Understanding the deformation behavior of 17-4 precipitate hardenable stainless steel produced by direct metal laser sintering using micropillar compression and TEMThe International Journal of Advanced Manufacturing Technology, 2016
- The Effectiveness of Hot Isostatic Pressing for Closing Porosity in Titanium Parts Manufactured by Selective Electron Beam MeltingMetallurgical and Materials Transactions A, 2016
- Effects of Powder Attributes and Laser Powder Bed Fusion (L-PBF) Process Conditions on the Densification and Mechanical Properties of 17-4 PH Stainless SteelJOM, 2016
- Mechanical behavior of additive manufactured, powder-bed laser-fused materialsMaterials Science and Engineering: A, 2016
- Densification behavior of gas and water atomized 316L stainless steel powder during selective laser meltingApplied Surface Science, 2010
- Processing conditions and microstructural features of porous 316L stainless steel components by DMLSApplied Surface Science, 2008