Morphology and properties of electrically and rheologically percolated PLA/PCL/CNT nanocomposites
- 23 May 2017
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 134 (36)
Abstract
Poly(lactic acid)/poly(ɛ‐caprolactone)/carbon nanotube (PLA/PCL/CNT) nanocomposites (NCs) were melt‐processed in a conventional industrial‐like twin‐screw extruder maintaining a constant PLA/PCL 80/20 wt. ratio. CNTs located in the thermodynamically favored PCL phase and, as a result, the “sea–island” morphology of the unfilled blend was replaced by a more continuous PCL dispersed phase in the ternary NCs. Rheological and electrical percolation took place at the same CNT contents (over 1.2 wt %) that TEM images suggest continuity of the PCL phase. The electrical and the low‐strain mechanical behaviors upon CNT addition were similar in the reference binary PLA/CNT and ternary PLA/PCL/CNT NCs. In the percolated NCs, the conductivity became 106–107 times higher than in the insulating compositions, while the Young modulus increased linearly upon the addition of CNT (12% increase at 4.9 wt % loading). Moreover, all the PLA/PCL/CNT NCs showed a ductile behavior (elongation at break >130%) similar to that of the unfilled PLA/PCL blend (140%), in contrast to the brittle behavior of binary PLA/CNT NCs. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017, 134, 45265.Keywords
Funding Information
- Basque Government (S-PE13UN064, IT611-13)
- University of the Basque Country (UFI 11/56)
- MINECO
This publication has 77 references indexed in Scilit:
- Selective Localization of Nanofillers: Effect on Morphology and Crystallization of PLA/PCL BlendsMacromolecular Chemistry and Physics, 2011
- Stiffening of Polycarbonate by Addition of a Highly Dispersed and Fibrillated Amorphous Polyamide‐Based NanocompositeMacromolecular Materials and Engineering, 2010
- Mechanical properties of poly(ε‐caprolactone) and poly(lactic acid) blendsJournal of Applied Polymer Science, 2008
- Crystallization, morphology, and mechanical behavior of polylactide/poly(ε‐caprolactone) blendsPolymer Engineering & Science, 2006
- The effect of crosslinking on the mechanical properties of polylactic acid/polycaprolactone blendsJournal of Applied Polymer Science, 2006
- Polyethylene multiwalled carbon nanotube compositesPolymer, 2005
- Mechanical properties and electrical conductivity of carbon-nanotube filled polyamide-6 and its blends with acrylonitrile/butadiene/styrenePolymer, 2004
- Influence of the Blend Viscosity and Interface Energies on the Preferential Location of CB and Conductivity of BR/EPDM BlendsRubber Chemistry and Technology, 2003
- Dielectric spectroscopy on melt processed polycarbonate—multiwalled carbon nanotube compositesPolymer, 2003
- Electrostatic Deflections and Electromechanical Resonances of Carbon NanotubesScience, 1999