Laser gas assisted nitriding of alumina surfaces
Authors:
- B. S. YilbasBYB. S. Yilbas
- C. KaratasCKC. Karatas
- A. F. M. ArifAAA. F. M. Arif
- B. J. Abdul AleemBAB. J. Abdul Aleem
- 1 April 2009
- journal article
- research article
- Published by SAGE Publications in Surface Engineering
- Vol. 25 (3) , 235-240
Abstract
The laser control melting can be applied to improve the structural and tribological properties of alumina surfaces. In this case, the laser remelting provides a homogeneous structure while the assisting gas diffuses into molten layer forming the nitride compounds in the irradiated region. Since the process is rapid, local heating with controllable depth and cost effective, the laser remelting provides several advantages over the conventional surface treatment techniques. In the present study, laser melting and gas assisted nitriding of alumina pellets are carried out. Morphological and metallurgical changes after the laser treatment process are examined using scanning electron microscopy (SEM), optical microscopy and X-ray diffraction (XRD), and indentation tests. It is found that two regions are formed in the laser irradiated zone. The first region below the surface is dense and composes of α-Al2O3 and AlN while in the second region, which is below the first region, randomly stacked lamellae structure is observed.Keywords
This publication has 24 references indexed in Scilit:
- Characterization of microstructure in laser surface modified alumina ceramicMaterials Characterization, 2008
- Validation of crystallographic correlation for faceted morphology in laser surface engineered alumina ceramicScripta Materialia, 2007
- Fast heating and melting of alumina under the effect of concentrated laser radiationHigh Temperature, 2007
- Laser surface modification and characterization of air plasma sprayed alumina coatingsSurface and Coatings Technology, 2006
- Preparation of α‐Alumina Platelets by Laser ScanningJournal of the American Ceramic Society, 2004
- 炭酸ガスレーザ照射による非晶質アルミナ粉体の結晶化と焼結Journal of the Ceramic Society of Japan, 2004
- Fabrication and Characterisation of Laser Surface Modified Plasma Sprayed Alumina CoatingsSurface Engineering, 2002
- Laser induced structural and microstructural transformations of plasma sprayed Al2O3 coatingsScripta Materialia, 2001
- Transient thermal deformation of alumina (A1 2 O 3 ) substrate during laser drilling2001
- Surface treatment of plasma-sprayed ceramic coatings by a laser beamSurface and Coatings Technology, 1988