One‐step hydrothermal synthesis of a green NiCo‐LDHs‐rGO composite for the treatment of lead ion in aqueous solutions
Authors:
Open Access
- 24 October 2023
- journal article
- research article
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 102 (3) , 1248-1261
Abstract
Herein, we have synthesized a microspherical nickel‐cobalt‐layered double hydroxides‐reduced graphene oxide composite (NiCo‐LDHs‐rGO) through a one‐step hydrothermal method and then used it as an adsorbent for the removal of Pb2+ from aqueous solutions. Fourier transform infrared spectrophotometry (FT‐IR), field emission scanning electron microscopy (FESEM), mapping elemental analysis, electron dispersive x‐ray spectroscopy (EDX), x‐ray diffraction analysis (XRD), and the Brunauer–Emmett–Teller (BET) method were used for the characterization of the adsorbent. Factors affecting the adsorption of Pb2+ ion such as solution pH, adsorbent dosage, contact time, competing ion, and regeneration were investigated in batch mode by the NiCo‐LDHs‐rGO. Under optimized conditions based on the Taguchi method (pH = 5.0, adsorbent dosage = 20 mg, and contact time = 30 min), the highest removal percentage was found to be 99.7% for 100 mg L−1 of Pb2+. According to the results, NiCo‐LDHs‐rGO exhibited a high preference for Pb2+ over Cu2+, Zn2+, and Cd2+. This adsorbent was regenerated for several cycles (using 0.01 M HCl) with no significant deterioration in performance. Analyses of the adsorption isotherm models revealed that the adsorption of Pb2+ follows Freundlich isotherm with a maximum adsorption capacity of 200 mg g−1. Also, the kinetic data confirmed that pseudo second order kinetic equation is the best model for predicting the kinetics. Furthermore, the Simulink modelling illustrated that the adsorption kinetics of Pb2+ onto NiCo‐LDHs‐rGO is done with high accuracy in a continuous stirred‐tank reactor. Finally, dual interactions of the effective parameters can be modelled by polynomial equations in MATLAB, and according to the Taguchi model, pH is clearly the most important feature among all effective parameters.Keywords
This publication has 55 references indexed in Scilit:
- Porous graphene oxide/carboxymethyl cellulose monoliths, with high metal ion adsorptionCarbohydrate Polymers, 2014
- Synthesis and electrochemical properties of reduced graphene oxide via chemical reduction using thiourea as a reducing agentMaterials Letters, 2013
- Toxicity of lead: a review with recent updatesInterdisciplinary Toxicology, 2012
- The Taguchi methodWIREs Computational Statistics, 2011
- Separation/preconcentration of silver(I) and lead(II) in environmental samples on cellulose nitrate membrane filter prior to their flame atomic absorption spectrometric determinationsJournal of Hazardous Materials, 2007
- Diaion SP-850 resin as a new solid phase extractor for preconcentration-separation of trace metal ions in environmental samplesJournal of Hazardous Materials, 2006
- Biosorption of nickel(II) ions onto Sargassum wightii: Application of two-parameter and three-parameter isotherm modelsJournal of Hazardous Materials, 2006
- Equilibrium Adsorption Studies of Some Aromatic Pollutants from Dilute Aqueous Solutions on Activated Carbon at Different TemperaturesJournal of Colloid and Interface Science, 1997
- ADSORPTION ISOTHERMS FOR PURE HYDROCARBONSIndustrial & Engineering Chemistry, 1952
- On the Structure of a Catalyst SurfaceThe Journal of Chemical Physics, 1948