Evaluation of Cu adhesive energy on barrier metals by means of contact-angle measurement
Authors:
- 15 November 1995
- journal article
- conference paper
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 78 (10) , 5989-5992
Abstract
The adhesive energies at Cu/SiO2, Cu/TiN, and Cu/TiW interfaces were investigated by measuring the contact angles of Cu particles to the substrate. To form the Cu particles, thin Cu films deposited on each substrate were annealed at 500 °C for 50 h. The adhesive energies are determined to be 0.8, 1.8, and 2.2 N/m for the SiO2, TiN, and TiW, respectively. The Cu particle on TiW film shows the highest adhesion. When TiW is used as a barrier metal, fine Cu lines are fabricated by reactive ions etching without peeling. On the other hand, Cu lines on the TiN film are peeled during the etching. This is consistent to the evaluation result that TiW has higher adhesive energy than TiN.Keywords
This publication has 11 references indexed in Scilit:
- Wetting Kinetics and the Interfacial Interaction Behavior between Electroless Ni–Cu–P and Molten SolderJapanese Journal of Applied Physics, 1994
- Plasma Etching of Copper Films Using IR Light IrradiationMRS Proceedings, 1994
- Interdiffusions in Cu/reactive-ion-sputtered TiN, Cu/chemical-vapor-deposited TiN, Cu/TaN, and TaN/Cu/TaN thin-film structures: Low temperature diffusion analysesJournal of Applied Physics, 1992
- Microindentation adhesion tester and its application to thin filmsThin Solid Films, 1992
- Reactively sputtered TiN as a diffusion barrier between Cu and SiJournal of Applied Physics, 1990
- Equilibrium shape and temperature; Lead on graphiteSurface Science, 1983
- Diffusion of copper in thin TiN filmsThin Solid Films, 1982
- Diffusion processes in thin filmsThin Solid Films, 1980
- Measurement of interfacial energy of adhesion by scanning electron microscopyMaterials Science and Engineering, 1973
- Equilibrium shape of a small particle in contact with a foreign substrateActa Metallurgica, 1967