Flax fiber‐reinforced polylactide stereocomplex composites with enhanced heat resistance and mechanical properties
Authors:
- 29 May 2015
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 38 (3) , 472-478
Abstract
Polylactide stereocomplex (sc‐PLA) prepared by blending equivalent proportion of poly( l ‐lactic acid)/poly( d ‐lactic acid) (PLLA/PDLA) and its composites reinforced with 10, 20, and 30% flax fibers were fabricated by melt compounding and followed by injection molding. The mechanical properties, crystallinity, cross‐section morphology, and heat resistance of sc‐PLA and flax/sc‐PLA composites were compared. The results showed that homocrystallites (hc) and stereocomplex crystallites (sc) were formed simultaneously in sc‐PLA and its composites, with a melting temperature at ∼170 and ∼210°C, respectively. The crystallinity and sc content of composite increased with the increasing content of the flax fibers. The sc content of 30% flax/sc‐PLA composite could reach 98.4%, 32% higher than that of sc‐PLA (66.4%). When compared with nonblended PLLA, heat resistance of sc‐PLA increased slightly, but at the expense of mechanical properties. By the addition of flax fibers, the mechanical properties of flax/sc‐PLA composite improved significantly. The highest tensile strength, Young's modulus, and notched Izod impact strength of flax/sc‐PLA composite were 52.90 MPa, 6.42 GPa, and 5.27 kJ/m 2 , respectively, improved by 54, 132, and 343% when compared with sc‐PLA. Moreover, the heat resistance of composite was also improved greatly by reinforcing with flax fibers. The Vicat softening temperature of 30% flax/sc‐PLA composite could achieve 162.5°C, nearly 100°C higher than that of PLLA. POLYM. COMPOS., 38:472–478, 2017. © 2015 Society of Plastics EngineersKeywords
This publication has 24 references indexed in Scilit:
- Thermal and phase-separation behavior of injection-molded poly(l-lactic acid)/poly(d-lactic acid) blends with moderate optical purityPolymer Bulletin, 2011
- Mechanical and Thermal Properties of Green Polylactide Composites with Natural FillersMacromolecular Bioscience, 2008
- Crystallinity and mechanical properties of optically pure polylactides and their blendsPolymer Engineering & Science, 2005
- Infrared Spectroscopic Study of CH3···OC Interaction during Poly(l-lactide)/Poly(d-lactide) Stereocomplex FormationMacromolecules, 2005
- Differences in the CH3⋯OC interactions among poly(l-lactide), poly(l-lactide)/poly(d-lactide) stereocomplex, and poly(3-hydroxybutyrate) studied by infrared spectroscopyJournal of Molecular Structure, 2005
- Enhanced thermal stability of poly(lactide)s in the melt by enantiomeric polymer blendingPolymer, 2003
- New nanocomposite materials based on plasticized poly(l-lactide) and organo-modified montmorillonites: thermal and morphological studyPolymer, 2003
- Stereocomplex formation between enantiomeric poly(lactic acid)s. XI. Mechanical properties and morphology of solution-cast filmsPolymer, 1999
- Crystal structure of stereocomplex of poly(L-lactide) and poly(D-lactide)Journal of Macromolecular Science, Part B, 1991
- Stereocomplex formation between enantiomeric poly(lactides)Macromolecules, 1987