Electrochemical evaluation of Ti‐13Nb‐13Zr, Ti‐6Al‐4V and Ti‐6Al‐7Nb alloys for biomedical application by long‐term immersion tests
Authors:
- 9 May 2007
- journal article
- research article
- Published by Wiley in Materials and Corrosion
- Vol. 58 (5) , 329-333
Abstract
In this investigation the electrochemical behaviour of the Ti‐13Nb‐13Zr, Ti‐6Al‐4V and Ti‐6Al‐7Nb alloys, for application as implant materials was evaluated in Hanks' solution by electrochemical techniques. The alloys were immersed in this solution for 410 days and periodically they were tested by electrochemical impedance spectroscopy. At the end of this period, polarization curves of the three titanium alloys were obtained. The electrochemical impedance experimental results were interpreted using an equivalent electrical circuit that simulates a duplex structure oxide composed of an inner compact layer, here called barrier layer, and an outer and porous layer. The results indicated that all the alloys present a very high corrosion resistance in the electrolyte used, typical of passive alloys, and that the corrosion resistance is mainly due to the barrier layer. The passive like behaviour was maintained during the whole period of test.Keywords
This publication has 14 references indexed in Scilit:
- Corrosion characterization of titanium alloys by electrochemical techniquesElectrochimica Acta, 2006
- A comparative study of thein vitrocorrosion behavior and cytotoxicity of a superferritic stainless steel, a Ti‐13Nb‐13Zr alloy, and an austenitic stainless steel in Hank's solutionJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2005
- Electrochemical impedance spectroscopy characterization of passive film formed on implant Ti–6Al–7Nb alloy in Hank's solutionJournal of Materials Science: Materials in Medicine, 2004
- Nucleation and growth of apatite on chemically treated titanium alloy: an electrochemical impedance spectroscopy studyBiomaterials, 2003
- Corrosion behaviour of titanium in biofluids containing H2O2 studied by electrochemical impedance spectroscopyCorrosion Science, 2001
- Effects of Nb and Zr Alloying Additions on the Activation Behavior of Ti in Hydrochloric AcidJournal of the Electrochemical Society, 1999
- Electrochemical impedance spectroscopy study of the passive oxide film on titanium for implant applicationElectrochimica Acta, 1996
- Electrochemistry and Passivity of Ti‐15 V‐3 Cr‐3 Al‐3 Sn β‐Titanium Alloy in Ambient Temperature Aqueous Chloride SolutionsJournal of the Electrochemical Society, 1994
- Electrochemistry and Passivity of a Ti‐15Mo‐3Nb‐3Al Beta‐Titanium Alloy in Ambient Temperature Aqueous Chloride SolutionsJournal of the Electrochemical Society, 1993
- Use of a.c. impedance methods to study the corrosion behaviour of implant alloysBiomaterials, 1993