Corrosion Behavior of Alumina Containing Refractory in Blast Furnace Hearth by CaO–SiO2–MgO–Al2O3–Cr2O3 Slags
Authors:
Open Access
- 15 November 2019
- journal article
- research article
- Published by Iron and Steel Institute of Japan in ISIJ International
- Vol. 59 (11) , 1933-1939
Abstract
The corrosion behaviors of corundum brick and carbon composite brick used in blast furnace hearth by CaO–SiO2–MgO–Al2O3–Cr2O3(-CaF2) slags were studied in the present work. The degradation of the corundum brick in slag was a result of slag infiltration and brick dissolution, and the corrosion of the brick became more serious with the addition of CaF2 due to the decrease of slag viscosity. The disintegration of carbon composite brick in CaF2-containing slag was caused by the combination of slag penetration, brick dissolution and reaction between slag and brick. By comparing the corrosion behavior in CaF2-containing slag between the corundum brick and carbon composite brick, the corrosion degree of the corundum brick was greater than that of the carbon composite brick. To the blast furnace operation in which a low grade iron ore such as laterite ore and CaF2 containing slag (about 2 wt%) are used, it was found that the carbon composite brick with better slag corrosion resistance can be selected as a hearth refractory so as to improve the operation performance and ensure the longer campaign life of blast furnace.Keywords
This publication has 22 references indexed in Scilit:
- Influence of CaF2 in calcium aluminate-based slag on the degradation of magnesia refractoryCeramics International, 2018
- Corrosion behavior of carbon composite brick in high alumina slagsCeramics International, 2018
- Influence of TiO2 on the Viscosity of a High Alumina Slag and on Carbon Brick CorrosionSteel Research International, 2017
- Dissolution behavior of a novel Al 2 O 3 -SiC-SiO 2 -C composite refractory in blast furnace slagCeramics International, 2017
- Study on the slag corrosion resistance of unfired Al2O3–SiC/β-Sialon/Ti(C, N)–C refractoriesCeramics International, 2014
- Viscosity of Fluoride‐Free Mold Fluxes Containing B2O3 and TiO2Steel Research International, 2013
- The Effect of Calcium Fluoride on Slag ViscosityMetallurgical and Materials Transactions B, 2011
- Interfacial Reaction between Refractory Materials and Metallurgical Slags containing FluorideSteel Research International, 2010
- Degradation mechanisms of magnesia-carbon refractories by high-alumina stainless steel slags under vacuumCeramics International, 2007
- Degradation of MgO refractory in CaO-SiO2-MgO-FeO x and CaO-SiO2-Al2O3-MgO-FeO x slags under forced convectionMetallurgical and Materials Transactions B, 2005