Experimental Study on Seepage Characteristics of a Soil-Rock Mixture in a Fault Zone
Authors:
- Pengfei WangPWPengfei Wang
- Xiangyang ZhangXZXiangyang Zhang
Open Access
- 1 January 2022
- journal article
- research article
- Published by Tech Science Press in Fluid Dynamics & Materials Processing
- Vol. 18 (2) , 271-283
Abstract
A mixture of fault gouge and rubble taken out from a fault zone is used to prepare a S-RM (Soil-Rock Mixture) sample with rock block proportions of 20%, 30%, 40%, 50%, 60% and 70%, respectively. A GDS triaxial test system is used accordingly to measure the seepage characteristics of such samples under different loading and unloading confining pressures in order to determine the variation law of the permeability coefficient. The test results show that: (1) The permeability coefficient of the S-RM samples decreases as the pressure increases, and the decrease rate of this coefficient in the initial stage of confining pressure loading is obviously higher than in the semi-late period; (2) The permeability coefficient at different confining pressure levels presents a common trend as the rock block proportion is increased, i.e., it decreases first then it increases (the permeability coefficient of the sample with rock block proportion 40% being the smallest, 70% the largest); (3) In the stage of confining pressure unloading, the recovery degree of the permeability coefficient grows with the increase of rock block proportion (the recovery rate of S-RM sample with rock block proportion 70% reaches 50.2%); (4) In the stage of confining pressure loading and unloading, the sensitivity of the permeability coefficient to the rock block proportion displays the inverse “Z” variation rule (when rock block proportion reaches 60%, the sensitivity is highest); (5) In the stage of confining pressure loading, the relationship between the permeability coefficient and confining pressure can be described by an exponential relationship.Keywords
This publication has 19 references indexed in Scilit:
- Model Development and Experimental Verification for Permeability Coefficient of Soil–Rock MixtureInternational Journal of Geomechanics, 2017
- High-Resolution Neutron and X-Ray Imaging of Granular MaterialsJournal of Geotechnical and Geoenvironmental Engineering, 2013
- Failure patterns of geomaterials with block-in-matrix texture: experimental and numerical evaluationArabian Journal of Geosciences, 2013
- Classification and identification of hydrocarbon reservoir lithofacies and their heterogeneity using seismic attributes, logs data and artificial neural networksJournal of Petroleum Science and Engineering, 2012
- In situ non-conventional shear tests for the mechanical characterisation of a bimrockInternational Journal of Rock Mechanics and Mining Sciences, 2011
- Prediction of geological hazardous zones in front of a tunnel face using TSP-203 and artificial neural networksTunnelling and Underground Space Technology, 2008
- Effects of coarse-grained material on hydraulic properties and shear strength of top soilEngineering Geology, 2008
- High-resolution tomography of cracks, voids and micro-structure in greywacke and limestoneJournal of Structural Geology, 2008
- Deformation Patterns of Reinforced Foundation Sand at FailureJournal of Geotechnical and Geoenvironmental Engineering, 2003
- Porosity influence on the shear strength of granular material–clay mixturesEngineering Geology, 2000