Investigation of the Fracture Resistance of Hot-Mix Asphalt Concrete Using a Disk-Shaped Compact Tension Test
Authors:
- Michael WagonerMWMichael Wagoner
- William ButtlarWBWilliam Buttlar
- Glaucio PaulinoGPGlaucio Paulino
- Philip BlankenshipPBPhilip Blankenship
- 1 January 2005
- journal article
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 1929 (1) , 183-192
Abstract
In recent years the transportation materials research community has focused a great deal of attention on the development of testing and analy- sis methods to shed light on fracture development in asphalt pavements. Recently it has been shown that crack initiation and propagation in asphalt materials can be realistically modeled with cutting-edge computational fracture mechanics tools. However, much more progress is needed toward the development of practical laboratory fracture tests to support these new modeling approaches. The goal of this paper is twofold: (a) to present a disk-shaped compact tension (DC(T)) test, which appears to be a prac- tical method for determining low-temperature fracture properties of cylindrically shaped asphalt concrete test specimens, and (b) to illustrate how the DC(T) test can be used to obtain fracture properties of asphalt concrete specimens obtained from field cores following dynamic modulus and creep compliance tests performed on the same specimens. Testing four mixtures with varied composition demonstrated that the DC(T) test could detect the transition from quasi-brittle to brittle fracture by testing at several low temperatures selected to span across the glass transition temperatures of the asphalt binder used. The tendency toward brittle fracture with increasing loading rate was also detected. Finally, the DC(T) test was used in a forensic study to investigate premature reflective crack- ing of an isolated portion of pavement in Rochester, New York. One ben- efit of the DC(T) test demonstrated during testing of field samples was the ability to obtain mixture fracture properties as part of an efficient suite of tests performed on cylindrical specimens. Asphalt pavement life span and rideability and the need for costly maintenance treatments are significantly affected by the type, extent, and rate of fracture that occurs in the surface layers of these pavements. Various forms of fracture are commonly observed, including thermal cracking (transverse to the direction of traffic), longitudinal surface or "top-down" cracking, and reflective cracking of asphalt overlays placed on existing jointed or cracked pavements (1). In recent years a great deal of effort has been directed toward the development of testing and analysis methods that can be used to study the mecha- nisms of crack initiation and propagation in asphalt pavements (2-5). Moreover, it has been shown that crack initiation and prop- agation in asphalt materials can be realistically modeled with cut- ting-edge computational fracture mechanics tools (6, 7 ). This approach incorporates a cohesive zone interface fracture model within a finite element modeling framework to describe the initiation and propagation of fracture (separation) of the material. An advantage of an integrated testing and modeling program is the ability to extract information from the laboratory results that cannot be determined from measurements alone. For instance, this approach can be used to gain insight into the isolation of crack formation energy from other sources of energy consumption in fracture tests. Furthermore, once a cohe- sive zone constitutive model is calibrated to laboratory test results, the extension of the model to field studies can be accomplished with reduced model calibration. That will not only lead to better prediction of field deterioration, but it will also provide more realistic insight into deterioration mechanisms. To take full advantage of these new modeling approaches, advancesKeywords
This publication has 10 references indexed in Scilit:
- Development of a Single-Edge Notched Beam Test for the Study of Asphalt Concrete Fracture2005
- Constraint comparisons for common fracture specimens: C(T)s and SE(B)sEngineering Fracture Mechanics, 2004
- Thickness effect on fracture energy of cementitious materialsCement and Concrete Research, 2003
- Considering Material Heterogeneity in Crack Modeling of Asphaltic MixturesTransportation Research Record: Journal of the Transportation Research Board, 2003
- Semi-circular bending test to assess the resistance against crack growth2003
- Development of Efficient Crack Growth Simulator Based on Hot-Mix Asphalt Fracture MechanicsTransportation Research Record: Journal of the Transportation Research Board, 2003
- Fracture and Tensile Characteristics of Asphalt-Rubber ConcreteJournal of Materials in Civil Engineering, 1999
- Evaluation of Crack Propagation Properties of Asphalt MixturesJournal of Transportation Engineering, 1997
- Variation of fracture toughness of asphalt concrete under low temperaturesConstruction and Building Materials, 1997
- Fracture Morphology and Fracture Toughness Measurement of Polymer-Modified Asphalt ConcreteTransportation Research Record: Journal of the Transportation Research Board, 1997