Single model establishing strength of dispersive clay treated with distinct binders
- 1 December 2016
- journal article
- Published by Canadian Science Publishing in Canadian Geotechnical Journal
- Vol. 53 (12) , 2072-2079
Abstract
Dispersive clays experience deflocculation in the presence of somewhat clean still water and are extremely vulnerable to erosion. Lime or Portland cement usage is one of the most applied methods to amend such adverse characteristics and enhance mechanical properties. Present research is aimed at a single power function quantifying the effect of amounts of binder, porosity, and curing period in the assessment of unconfined compressive strength (qu) of dispersive clay–binder mixtures. Analysing qu results, it was found that a ratio between porosity and binder volumetric content controls the strength of blends. The qu values of the specimens moulded for each binder type were also normalized (i.e., divided by the qu attained at a specific porosity/binder ratio) reaching a single power function quantifying the influence of the binder’s amount, porosity, and curing time. From a pragmatic standpoint, this denotes that carrying out only one unconfined compression test with a specimen moulded with a specific binder, porosity, and cured for a given time period allows to determine an equation that controls the strength for a whole range of porosities and binder contents. The developed normalization was successfully extended to other fine-grained soils treated with cement, lime, and even pozzolan–lime, considering longer curing periods.Keywords
This publication has 19 references indexed in Scilit:
- Effect of the Porosity/Cement Ratio on the Compression of Cemented SoilJournal of Geotechnical and Geoenvironmental Engineering, 2012
- Parameters controlling stiffness and strength of artificially cemented soilsGéotechnique, 2012
- Water content, porosity and cement content as parameters controlling strength of artificially cemented silty soilEngineering Geology, 2011
- Porosity-Cement Ratio Controlling Strength of Artificially Cemented ClaysJournal of Materials in Civil Engineering, 2011
- Key Parameters for the Strength Control of Lime Stabilized SoilsJournal of Materials in Civil Engineering, 2009
- Key parameters dictating strength of lime/cement-treated soilsProceedings of the Institution of Civil Engineers - Geotechnical Engineering, 2009
- Loading tests on compacted soil, bottom-ash and lime layersProceedings of the Institution of Civil Engineers - Geotechnical Engineering, 2008
- Key Parameters for Strength Control of Artificially Cemented SoilsJournal of Geotechnical and Geoenvironmental Engineering, 2007
- Circular footings on a cemented layer above weak foundation soilCanadian Geotechnical Journal, 2005
- Assessment of strength development in cement-admixed high water content clays with Abrams' law as a basisGéotechnique, 2003