High power light-emitting diode junction temperature determination from current-voltage characteristics
- 1 November 2008
- journal article
- conference paper
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 104 (9) , 093104
Abstract
Optical and electrical characteristics of power light-emitting diodes (LEDs) are strongly dependent on the diode junction temperature. However, direct junction temperature determination is not possible and alternative methods must be developed. Current-voltage characteristics of commercial high power LEDs have been measured at six different temperatures ranging between 295 and 400 K. Modeling these characteristics, including variation in the bandgap with temperature, revealed a linear temperature dependence of the forward voltage if the drive current is chosen within a rather limited current range. Theoretically, the voltage intercept can be deduced from the bulk semiconductor bandgap. However, accurate junction temperature determination is only possible if at least two calibration measurements at a particular drive current are performed. The method described in this paper can be applied to calculate the thermal resistance from the junction to any other reference point for any particular LED configuration.Keywords
This publication has 11 references indexed in Scilit:
- Light-Emitting Diodes2006
- Stabilizing scintillation detector systems with pulsed LEDs: a method to derive the LED temperature from pulse height spectraIEEE Transactions on Nuclear Science, 2005
- Junction temperature in light-emitting diodes assessed by different methods2005
- Junction and carrier temperature measurements in deep-ultraviolet light-emitting diodes using three different methodsApplied Physics Letters, 2005
- Junction–temperature measurement in GaN ultraviolet light-emitting diodes using diode forward voltage methodApplied Physics Letters, 2004
- Temperature Measurement of Visible Light-Emitting Diodes Using Nematic Liquid Crystal Thermography With Laser IlluminationIEEE Photonics Technology Letters, 2004
- A noncontact method for determining junction temperature of phosphor-converted white LEDs2004
- Experimental analysis and theoretical model for anomalously high ideality factors (n≫2.0) in AlGaN/GaN p-n junction diodesJournal of Applied Physics, 2003
- Low-temperature study of current and electroluminescence in InGaN/AlGaN/GaN double-heterostructure blue light-emitting diodesApplied Physics Letters, 1996
- Current-voltage characteristic of Ti-pSi metal-oxide-semiconductor diodesJournal of Applied Physics, 1984