Bubble size and bubble velocity distribution in bubble columns under industrial conditions
Authors:
- 19 January 2017
- journal article
- research article
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 95 (5) , 902-912
Abstract
Bubble column reactors are widely used in many industrial applications due to their simplicity and safety of operation. Despite these advantages, the design and scale‐up of bubble column reactors is still challenging especially for industrial conditions at elevated pressure and temperature. One reason is the uncertainties concerning the specific interfacial area which is directly dependent on the bubble size distribution, bubble velocity, and gas hold‐up. All these parameters are difficult to measure under industrial conditions due to the opaqueness of the bubbly flow and the safety risks of using organic solvents at elevated pressures and temperatures. This article introduces endoscopic bubble image velocimetry, a new measuring method that enables the detection of bubble sizes and bubble velocities in organic solvents at elevated pressure and temperature (pmax = 1.85 MPa and Tmax = 70 °C) for maximal gas hold‐ups of 16 %. For this system it becomes evident that the bubble size distribution for low superficial gas velocities is almost unaffected by pressure and temperature, whereas the bubble velocity decreases slightly.Keywords
Funding Information
- Federal Ministry of Education and Research
This publication has 28 references indexed in Scilit:
- BMBF-Projekt „Multi-Phase”︁Chemie Ingenieur Technik, 2013
- Direct Quadrature Method of Moments for the Mixing of Inert Polydisperse Fluidized Powders and the Role of Numerical DiffusionIndustrial & Engineering Chemistry Research, 2009
- Solution of the population balance equation using the sectional quadrature method of moments (SQMOM)Chemical Engineering Science, 2009
- Diameter of Bubbles in Bubble Column Reactors Operating with Organic LiquidsChemical Engineering Research and Design, 2005
- Implementation of the quadrature method of moments in CFD codes for aggregation–breakage problemsChemical Engineering Science, 2003
- Bubble coalescence and break‐up in air‐sparged bubble columnsAIChE Journal, 1990
- Ultrasonic Doppler Measurements of Bubble Velocities in Bubble Columns1984
- Meßtechniken zur Bestimmung der Eigenschaften von Blasen in BlasensäulenChemie Ingenieur Technik, 1979
- Auslegung und Maßstabsvergrößerung von Blasen‐ und TropfensäulenChemie Ingenieur Technik, 1977
- Bubble Size, Interfacial Area, and Liquid-Phase Mass Transfer Coefficient in Bubble ColumnsIndustrial & Engineering Chemistry Process Design and Development, 1974