Current-Limited Time-Optimal Response in Digitally Controlled DC–DC Converters
Authors:
- 3 May 2010
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 25 (11) , 2869-2880
Abstract
This paper addresses the problem of time-optimal load-transient response in digitally controlled dc-dc buck converters incorporating an inductor current limitation. The concept of current-limited, time-optimal control (CL-TOC) is introduced and compared to the conventional unconstrained time-optimal solution. A fundamental tradeoff between maximum-allowed current overshoot and voltage recovery time is recognized and analytically formulated, thus providing the engineer with the necessary analytical tools for performance evaluation. Furthermore, the minimum number of switching actions required to handle a generic CL-TOC transient is determined, thus leading to the formulation of a minimum-switch CL-TOC concept. Two distinct approaches for implementing minimum-switch digital CL-TOC are then introduced. The first method extends a parameter-independent time-optimal control that has the advantage of achieving the time-optimal switching sequence without the need for a prior knowledge of the output filter LC parameters or input voltage. The second approach implements a near CL-TOC employing the switching-surface concept and defining the current limitation in the state space. Experimental results are provided to validate the theory and demonstrate the effectiveness of the approaches.Keywords
This publication has 17 references indexed in Scilit:
- Hybrid Digital Adaptive Control for Fast Transient Response in Synchronous Buck DC–DC ConvertersIEEE Transactions on Power Electronics, 2009
- Digital charge balance controller with low gate count to improve the transient response of buck converters2009
- Constrained Optimal Control of the Step-Down DC–DC ConverterIEEE Transactions on Power Electronics, 2008
- Continuous-Time Digital Controller for High-Frequency DC-DC ConvertersIEEE Transactions on Power Electronics, 2008
- A Comparative Study of Boundary Control With First- and Second-Order Switching Surfaces for Buck Converters Operating in DCMIEEE Transactions on Power Electronics, 2007
- Digital Implementation of Boundary Control with Second-order Switching Surface for Inverters2007
- Selection of a curved switching surface for buck convertersIEEE Transactions on Power Electronics, 2006
- Derivation of a Second-Order Switching Surface in the Boundary Control of Buck ConvertersIEEE Power Electronics Letters, 2004
- Issues in boundary control [of power convertors]2002
- A State-Trajectory Control Law for DC-to-DC ConvertersIEEE Transactions on Aerospace and Electronic Systems, 1978