The Constitutive Model and Processing Map for In Situ 5wt% TiB2 Reinforced 7050 Al Alloy Matrix Composite
Authors:
- 1 September 2013
- journal article
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 575-576, 11-19
Abstract
This study investigated the constitutive flow behavior and hot workability of in-situ 5wt% TiB2 reinforced 7050 Al alloy matrix composite by hot compression experiments. Based on the experimental results of flow curves, a constitutive model describing the relationship of the flow stress, true strain, strain rate and temperature is proposed. Substantially, it is found the constitutive equation of flow stress is dependent on the strain, strain rate and temperature. The coefficients (E.g., α, n, Q and lnA) in the equation are functions of true strains. The results of the calculated values from constitutive equation are verified to well agree with the experimental values. Furthermore, the processing map of the composite is created in order to determine the hot processing domains. The optimum zones for hot workability and instability regions are identified. In instability domain, the microstructures display the main failure modes as the particle cracking and interface debonding.Keywords
This publication has 19 references indexed in Scilit:
- A constitutive model for predicting flow stress of Al18B4O33w/AZ91D composite during hot compression and its validationComputational Materials Science, 2011
- Constitutive flow behavior and hot workability of powder metallurgy processed 20vol.%SiCP/2024Al compositeMaterials Science and Engineering: A, 2010
- Kinetics of Hot Deformation in Mg/Nano-Al2O3 CompositeJournal of Composite Materials, 2009
- Effect of particulate/Al interface on the damping behavior of in situ TiB2 reinforced aluminium compositeMaterials Letters, 2007
- Effect of SiC concentration and strain rate on the compressive deformation behaviour of 2014Al-SiCp compositeMaterials Science and Engineering: A, 2006
- Effective elastic moduli of Al–Si composites reinforced in situ with TiB2 particlesScripta Materialia, 2006
- Development of processing map for 6061 Al/15% SiCp through neural networksJournal of Materials Processing Technology, 2005
- Effect of in situ TiB2 particle reinforcement on the creep resistance of hypoeutectic Al–12Si alloyJournal of Alloys and Compounds, 2005
- Isothermal forging of AA2618 + 20% Al2O3 by means of hot torsion and hot compression testsMaterials Science and Engineering: A, 2004
- On the hot working characteristics of 6061Al–SiC and 6061–Al2O3 particulate reinforced metal matrix compositesComposites Science and Technology, 2003