Mini-Crack Detection of Conveyor Belt Based on Laser Excited Thermography
Open Access
- 15 November 2021
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 11 (22) , 10766
Abstract
For a belt conveyor, a belt with mini-cracks influences the safety of the operation of the belt conveyor devices significantly. The lumpy material rubbing against a belt with mini-cracks will lead to detrimental tears on the belt while the conveyor works at high speeds. In order to detect mini-cracks in a timely manner, before the occurrence of large tears, a new mini-crack detection method for conveyor belts based on laser excited thermography is proposed. A laser beam is applied to generate a heat wave on the belt surface, so the corresponding thermal images can be recorded by an infrared camera. Then, an algorithm for extracting and fusing the features of mini-crack belt’s thermal images is firstly proposed by using time sequence analysis. It could transform multiple sequential thermal images into a single thermal image according to the frame difference method, so that the infrared thermal response of the mini-crack over time could be recorded quickly. To reveal the features of mini-crack, the power function image enhancement algorithm is proposed. After that, the threshold segmentation and Hough transform algorithm are used to determine the size of the mini-crack. The experimental results show that the mini-cracks with length of 50–140 mm, width of 1–10 mm, and depth of 5 mm can be successfully detected, and the detection accuracy could reach 96%. The detection results of different sizes of mini-crack show that the laser excited thermography has high damage sensitivity (1 mm diameter mini-crack detection), high accuracy (96%), lower power consumption (15 W laser excitation), and high SNR (signal-to-noise ratio).Keywords
This publication has 45 references indexed in Scilit:
- Investigation on eddy current pulsed thermography to detect hidden cracks on corroded metal surfaceNDT & E International, 2016
- The conveyor belt longitudinal tear on-line detection based on improved SSR algorithmOptik, 2016
- Detection of multiple thin surface cracks using vibrothermography with low-power piezoceramic-based ultrasonic actuator—a numerical study with experimental verificationSmart Materials and Structures, 2016
- Infrared spectra imaging mechanism and modelling of the transport of hazard beltMaterials Research Innovations, 2015
- Study of multi-agent-based coal mine environmental monitoring systemEcological Indicators, 2015
- Analysis of influence of conveyor belt overhang and cranking on pipe conveyor operational characteristicsMeasurement, 2015
- On-line conveyor belts inspection based on machine visionOptik, 2014
- Characterizing damage in CFRP structures using flash thermography in reflection and transmission configurationsComposites Part B: Engineering, 2014
- Crack sizing by laser excited thermographyNDT & E International, 2012
- Detection of pedestrians in far-infrared automotive night vision using region-growing and clothing distortion compensationInfrared Physics & Technology, 2010