Double-Evaporator Thermosiphon for Cooling 100 kWh Class Superconductor Flywheel Energy Storage System Bearings
Authors:
- Jisung LeeJLJisung Lee
- Sangkwon JeongSJSangkwon Jeong
- Junseok KoJKJunseok Ko
- Younghee HanYHYounghee Han
- Jeongphil LeeJLJeongphil Lee
- 23 June 2009
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 19 (3) , 2103-2106
Abstract
This paper presents an idea for a thermosiphon that uniquely implements two integrated evaporators to cool two HTS (High Temperature Superconductor) bulk sets in different locations, simultaneously. A so-called double-evaporator thermosiphon was designed, fabricated and tested using nitrogen as the working fluid under sub-atmospheric pressure conditions. The operating target temperature was approximately 65 K. To confirm the feasibility of the double-evaporator thermosiphon, experiments during the cool down process and steady state operation were extensively conducted on the double-evaporator thermosiphon (Ltot = 1075 mm, do = 160 mm). The double-evaporator thermosiphon worked successfully at steady state operation. The results showed that it had a maximum total temperature difference between the condenser and the evaporator of 1.3 K and a temperature difference between the two evaporators of 0.6 K at a heat flow of 87 W. This thermosiphon was designed for actual application to a 100 kWh SFES (Superconducting Flywheel Energy Storage) system. The potential impact of superior heat transfer characteristics of the double-evaporator thermosiphon is discussed in the paper.Keywords
This publication has 9 references indexed in Scilit:
- Experimental study on the double-evaporator thermosiphon for cooling HTS (high temperature superconductor) systemCryogenics, 2009
- Experimental investigation on the detachable thermosiphon for conduction-cooled superconducting magnetsCryogenics, 2006
- R&D of superconducting bearing technologies for flywheel energy storage systemsPhysica C: Superconductivity and its Applications, 2006
- Properties of Bulk YBCO2006
- Application of Superconducting Magnetic Bearings to a 10 kWh-Class Flywheel Energy Storage SystemIEEE Transactions on Applied Superconductivity, 2005
- Temperature and frequency effects in a high-performance superconducting bearingIEEE Transactions on Applied Superconductivity, 2003
- Designs and analyses of flywheel energy storage systems using high-Tc superconductor bearingsCryogenics, 2002
- Study on high temperature superconducting magnetic bearing for 10 kWh flywheel energy storage systemIEEE Transactions on Applied Superconductivity, 2001
- Superconducting magnetic bearings for energy storage flywheelsIEEE Transactions on Applied Superconductivity, 1999