Brilliant blue FCF dye adsorption using magnetic activated carbon from Sapelli wood sawdust
- 30 March 2023
- journal article
- research article
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 30 (20) , 58684-58696
Abstract
Sapelli wood sawdust-derived magnetic activated carbon (SWSMAC) was produced by single-step pyrolysis using KOH and NiCl2 as activating and magnetization agents. SWSMAC was characterized by several techniques (SEM/EDS, N2 adsorption/desorption isotherms, FTIR, XRD, VSM, and pHPZC) and applied in the brilliant blue FCF dye adsorption from an aqueous medium. The obtained SWSMAC was a mesoporous material and showed good textural properties. Metallic nanostructured Ni particles were observed. Also, SWSMAC exhibited ferromagnetic properties. In the adsorption experiments, adequate conditions were an adsorbent dosage of 0.75 g L−1 and a solution pH of 4. The adsorption was fast, and the pseudo-second-order demonstrated greater suitability to the kinetic data. The Sips model fitted the equilibrium data well, and the maximum adsorption capacity predicted by this model was 105.88 mg g−1 (at 55 °C). The thermodynamic study revealed that the adsorption was spontaneous, favorable, and endothermic. Besides, the mechanistic elucidation suggested that electrostatic interactions, hydrogen bonding, π–π interactions, and n–π interactions were involved in the brilliant blue FCF dye adsorption onto SWSMAC. In summary, an advanced adsorbent material was developed from waste by single-step pyrolysis, and this material effectively adsorbs brilliant blue FCF dye.Keywords
This publication has 52 references indexed in Scilit:
- Removal of Brilliant Blue FCF from Aqueous Solutions Using an Unmodified and Iron-Modified Bentonite and the Thermodynamic Parameters of the ProcessWater, Air, & Soil Pollution, 2013
- Removal of dyes from aqueous solutions with untreated coffee residues as potential low-cost adsorbents: Equilibrium, reuse and thermodynamic approachChemical Engineering Journal, 2012
- Insights into the modeling of adsorption isotherm systemsChemical Engineering Journal, 2010
- Adsorptive removal of hazardous anionic dye “Congo red” from wastewater using waste materials and recovery by desorptionJournal of Colloid and Interface Science, 2009
- Critical review in adsorption kinetic modelsJournal of Zhejiang University-SCIENCE A, 2009
- Adsorption treatment and recovery of the hazardous dye, Brilliant Blue FCF, over bottom ash and de-oiled soyaJournal of Colloid and Interface Science, 2006
- Sorption of Brilliant Blue FCF in soils as affected by pH and ionic strengthGeoderma, 2000
- Dye adsorption on mesoporous activated carbon fiber obtained from pitch containing yttrium complexCarbon, 1999
- Kinetic Models for the Sorption of Dye from Aqueous Solution by WoodProcess Safety and Environmental Protection, 1998
- A general treatment and classification of the solute adsorption isotherm. I. TheoreticalJournal of Colloid and Interface Science, 1974