Elastohydrodynamic lubrication friction mapping – the influence of lubricant, roughness, speed, and slide-to-roll ratio
- 11 May 2011
- journal article
- conference paper
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Vol. 225 (7) , 671-681
Abstract
A friction test is conducted in a Wedeven Associates Machine ball-on-disc test rig. The output from the test, friction coefficient versus entrainment speed and slide-to-roll ratio (SRR), is presented as a three-dimensional friction map. A number of parameters are varied while studying the friction coefficient; surface roughness, base oil viscosity, base oil type, and extreme pressure (EP) additive package. Entrainment speed, SRR, and oil temperature are also varied. The results show that the mapping is efficient in showing the different types of friction that may occur in an elasto-hydrodynamic lubrication contact. The results also show that the friction behaviour can be strongly influenced by changing surface roughness as well as base oil viscosity, base oil type, EP additive content, and operating temperature.Keywords
This publication has 21 references indexed in Scilit:
- Thermoelastohydrodynamic Analysis of Spur Gears with Consideration of Surface RoughnessTribology Letters, 2008
- An Experimental Investigation of Spur Gear EfficiencyJournal of Mechanical Design, 2008
- Performance of Spur Gears Considering Surface Roughness and Shear Thinning LubricantJournal of Tribology, 2008
- Coefficient of friction in mixed film lubrication: Gears versus twin-discsProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2007
- Friction coefficient in FZG gears lubricated with industrial gear oils: Biodegradable ester vs. mineral oilTribology International, 2006
- Power Loss Predictions in Geared Transmissions Using Thermal Networks-Applications to a Six-Speed Manual GearboxJournal of Mechanical Design, 2005
- Frictional behaviour of synthetic gear lubricants2001
- Elastohydrodynamic Lubrication of Involute GearsJournal of Engineering for Industry, 1973
- A simple theory of asperity contact in elastohydro-dynamic lubricationWear, 1972
- The Contact of Two Nominally Flat Rough SurfacesProceedings of the Institution of Mechanical Engineers, 1970