Preparation and Characterization of Phosphate Glass Fibers and Fabrication of Poly(caprolactone) Matrix Resorbable Composites
- 23 June 2009
- journal article
- research article
- Published by SAGE Publications in Journal of Reinforced Plastics and Composites
- Vol. 29 (12) , 1838-1850
Abstract
Phosphate glass fibers (20Na2O—24CaO—16MgO—40P 2O5) were prepared with varying pulling speeds from 50 to 2000 m/min. Fiber diameters ranging from 48 ± 6 μm to 12 ± 4 μm were obtained at pulling speeds of 50 and 2000 m/min respectively. Degradation tests of the fibers (up to 7 days) were carried out in aqueous medium at 37°C and indicated that phosphate glass fibers experience a higher mass loss initially before reaching a plateau. Before composite fabrication, fibers were treated using 3-aminopropyltriethoxysilane. Phosphate glass fiber reinforced poly(ε-caprolactone) matrix unidirectional composites were prepared by using both in-situ polymerization and compression molding techniques. For in-situ polymerized composites (25% fiber by volume), flexural strength (FS), flexural modulus (FM), tensile strength (TS), tensile modulus (TM), and impact strength (IS) were found to be 105 MPa, 5.9 GPa, 88 MPa, 6.8 GPa, and 27 kJ/m2, respectively. For compression molded composites (10% fiber by volume), FS, FM, TS, TM, and IS were found to be 55 MPa, 2.1 GPa, 46 MPa, 1.6 GPa, and 14 kJ/m2 respectively. After 6 weeks of immersion in aqueous media (37°C), the fibers inside the composite had degraded as determined by scanning electron microscope.Keywords
This publication has 27 references indexed in Scilit:
- Effect of glass composition on the degradation properties and ion release characteristics of phosphate glass—polycaprolactone compositesBiomaterials, 2005
- Preparation of poly(ε-caprolactone)/continuous bioglass fibre composite using monomer transfer moulding for bone implantBiomaterials, 2005
- Synthesis and degradation of sodium iron phosphate glasses and their in vitro cell responseJournal of Biomedical Materials Research Part A, 2004
- Phosphate glasses for tissue engineering: Part 1. Processing and characterisation of a ternary-based P2O5–CaO–Na2O glass systemBiomaterials, 2004
- Investigation of the solubility and ion release in the glass system K2O–Na2O–CaO–P2O5Biomaterials, 2001
- Medical Applications of Composites2000
- Exercise of young thoroughbred horses increases impact strength of the third metacarpal boneJournal of Orthopaedic Research, 1997
- In vitro and in vivo studies on bioabsorbable ultra‐high‐strength poly(L‐lactide) rodsJournal of Biomedical Materials Research, 1992
- Biocompatibility and mechanical properties of a totally absorbable composite material for orthopaedic fixation devicesJournal of Applied Biomaterials, 1992
- Mechanical properties of biodegradable polymers and composites proposed for internal fixation of boneJournal of Applied Biomaterials, 1990