Improved Electrochemical Performances of Surface-Modified Spinel LiMn[sub 2]O[sub 4] for Long Cycle Life Lithium-Ion Batteries
Authors:
- 1 January 2003
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 150 (10) , A1294-A1298
Abstract
The surface of spinel LiMn2O4LiMn2O4 was modified with inorganic salt LiAlO2LiAlO2 by a sol-gel method to improve its electrochemical performance at elevated temperatures. Compared with pristine spinel LiMn2O4,LiMn2O4, surface-modification improved the cycling stability of the material at elevated temperatures. The capacity retention of LiAlO2LiAlO2 -modified spinel LiMn2O4LiMn2O4 was more than 94% after 500 cycles at room temperature and more than 90% after 200 cycles at 55°C at 1C charge-discharge rate. Thermogravimetry/differential scanning calorimetry studies showed that the formation process of LiAlO2LiAlO2 on LiMn2O4LiMn2O4 was different from that of pure LiAlO2.LiAlO2. Powder X-ray diffraction indicated that spinel was the only detected phase in LiAlO2LiAlO2 -modified LiMn2O4.LiMn2O4. X-ray photoelectron spectroscopy showed that the Al content in the spinel decreased with the detection depth beneath the particle surface of the sample. Introduction of Al and Li into LiMn2O4LiMn2O4 changed the electronic structures of its O and Mn atoms on the particle surface, but the electronic structure of Al remained unchanged. Therefore a surface solid solution of LiAlxMn2−xO4LiAlxMn2−xO4 was formed on LiMn2O4.LiMn2O4. The thickness of the surface solid solution LiAlxMn2−xO4LiAlxMn2−xO4 was estimated to be about 12 nm. The improved electrochemical performance of surface-modified spinel LiMn2O4LiMn2O4 was attributed to the protection effect of the surface solid solution shell while the improved stability of crystalline structure was assigned to the entrance of Li+Li+ and Al3+Al3+ into the spinel crystalline structure. © 2003 The Electrochemical Society. All rights reserved.Keywords
This publication has 21 references indexed in Scilit:
- Improved Elevated Temperature Cycling of LiMn[sub 2]O[sub 4] Spinel Through the Use of a Composite LiF-Based ElectrolyteElectrochemical and Solid-State Letters, 2001
- Structural Fatigue in Spinel Electrodes in High Voltage (4 V) Li/Li[sub x]Mn[sub 2]O[sub 4] CellsElectrochemical and Solid-State Letters, 1999
- Self‐Discharge of LiMn2 O 4/C Li‐Ion Cells in Their Discharged State: Understanding by Means of Three‐Electrode MeasurementsJournal of the Electrochemical Society, 1998
- Materials' effects on the elevated and room temperature performance of CLiMn2O4 Li-ion batteriesJournal of Power Sources, 1997
- Synthesis and Electrochemistry of LiNi x Mn2 − x O 4Journal of the Electrochemical Society, 1997
- An Investigation of Lithium Ion Insertion into Spinel Structure Li‐Mn‐O CompoundsJournal of the Electrochemical Society, 1996
- The Spinel Phases LiM y Mn2 − y O 4 (M = Co, Cr, Ni) as the Cathode for Rechargeable Lithium BatteriesJournal of the Electrochemical Society, 1996
- Rechargeable cathodes based on Li2CrxMn2−xO4Journal of Power Sources, 1995
- Improved capacity retention in rechargeable 4 V lithium/lithium-manganese oxide (spinel) cellsSolid State Ionics, 1994
- Electrochemical extraction of lithium from LiMn2O4Materials Research Bulletin, 1984