Surface Profile Measurement and Error Compensation of Triangular Microstructures Employing a Stylus Scanning System
Open Access
- 22 November 2018
- journal article
- research article
- Published by Wiley in Journal of Nanomaterials
- Vol. 2018, 1-7
Abstract
Microstructure-based function components are widely used in precision engineering. Surface profile measurement is an essential tool to verify the manufacturing quality of microstructures and to enhance the working performance of the device employing microstructures as function components. However, highly accurate surface profile measurements are difficult to perform for microstructures owing to their complex surface topographies. In this paper, a measurement system is proposed for the surface profile measurement of microstructures. The main components of the measurement system are a precision displacement stage to move the workpiece, a homemade probing system with a diamond microstylus to sense the surface profile variation of the microstructures on the workpiece, and a vibration isolation table to reduce the disturbance of the measurement environment. In addition, the stability of the measurement was experimentally investigated. Microstructures with shape of equilateral right triangle were employed as the measurement specimen, and the surface profile of triangular microstructures was measured by employing two methods to correct errors caused by the specimen inclination and the radius of the stylus tip. The shape, depth, and period of the measured microstructures were also detected based on the results of the surface profile measurement. Experimental results demonstrate the feasibility of the proposed surface profile measurement for microstructures with complex surface topographies.Keywords
Funding Information
- National Major Projects of High-End CNC Machine Tools and Basic Manufacturing Equipment (2017ZX04020001-005)
This publication has 33 references indexed in Scilit:
- An ultra-precision tool nanoindentation instrument for replication of single point diamond tool cutting edgesMeasurement Science and Technology, 2018
- Structure design and experimental investigation of a multi-function stylus profiling system for characterization of engineering surfaces at micro/nano scalesMicrosystem Technologies, 2018
- Modeling and simulation of the probe tip based nanochannel scratchingPrecision Engineering, 2017
- Improved master-replica separation process for fabrication of a blazed concave grating by using a combination-type convex gratingApplied Optics, 2017
- Two-probe optical encoder for absolute positioning of precision stages by using an improved scale gratingOptics Express, 2016
- A Method to Control Dynamic Errors of the Stylus-Based Probing System for the Surface Form Measurement of MicrostructuresJournal of Nanomaterials, 2016
- A Slope‐Adapted Sample‐Tilting Method for Profile Measurement of Microstructures with Steep SurfacesJournal of Nanomaterials, 2015
- Dimensional measurement of microform with high aspect ratio using an optically controlled particle with standing wave scale sensingCIRP Annals, 2012
- Rapid measurement of a high step microstructure with 90° steep sidewallReview of Scientific Instruments, 2012
- Dimensional measurement of high aspect ratio micro structures with a resonating micro cantilever probeMicrosystem Technologies, 2000