Chevron-Notched Specimens for Measuring Adhesive Fracture Toughness
Author:
- 1 January 1988
- book chapter
- Published by ASTM International
- p. 69-82
Abstract
The Mode I fracture toughness of a nylon-modified epoxy adhesive joint has been measured using a chevron-notched specimen. Special data reduction techniques were developed for this bonded specimen. The fracture toughness KIc, and corresponding fracture energy GIc, for the adhesive were extracted from the Kc measured for the joint, and the toughness calibration (K-to-G) was shown to be insensitive to adhesive thickness. The measured KIc values were found to be reproducible and reasonable when compared to values reported for other toughened epoxies. Using this technique, we found that the toughness increased slightly with mouth opening rate (or crack velocity), decreased with adhesive thickness over the range 50 to 375 µm and remained fairly constant with temperature until Tg (glass transition temperature) was approached.Keywords
This publication has 11 references indexed in Scilit:
- Mode I and II fracture of adhesive jointsThe Journal of Strain Analysis for Engineering Design, 1984
- A Review of Chevron-Notched Fracture Specimens1984
- Chevron-Notched Specimens: Testing and Stress Analysis1984
- Comparisons of Fracture Toughness Measurements by the Short Rod and ASTM Standard Method of Test for Plane-Strain Fracture Toughness of Metallic Materials (E 399-78)Journal of Testing and Evaluation, 1980
- Theory for determining K Ic from small, non-LEFM specimens, supported by experiments on aluminumInternational Journal of Fracture, 1979
- Mechanics of crack growth in epoxide resinsPolymer Engineering & Science, 1979
- An analysis of the crack tip stress field in DCB adhesive fracture specimensInternational Journal of Fracture, 1978
- A simplified method for measuring plane strain fracture toughnessEngineering Fracture Mechanics, 1977
- The fracture of epoxy- and elastomer-modified epoxy polymers in bulk and as adhesivesJournal of Applied Polymer Science, 1975
- Fracture Toughness of Adhesive JointsThe Journal of Adhesion, 1971