A family of vernier permanent magnet machines utilizing an alternating rotor leakage flux blocking design
Authors:
- 1 October 2017
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 2461-2468
Abstract
Since the vernier machine (VM) is a flux modulation machine that also operates simultaneously as a synchronous machine, the torque producing mechanism of this device is difficult to understand. This paper begins with an analytical study of a synchronous permanent magnet (PM) machine, where the back-emf and torque are derived based on a generic number of slots per pole per phase stator. Numerical comparison of these two quantities is then made between an interior permanent magnet (IPM) machine and a vernier permanent magnet (VPM) machine. Performance predictions and design observations of the VPM are obtained. A new topology for a single air gap spoke type vernier permanent magnet (SVPM) machine using ferrite magnets is then proposed, where alternating flux barriers are placed at the bottom of pair-wise magnets on the rotor. Alternative topologies that share the same principle with V-shape and U-shape rare earth magnets are also introduced. Overall, the improved spoke type SVPM design effectively boosts the back-emf induction compared to the conventional SVPM, and torque production even surpasses that of a benchmark rare earth IPM machine although with a slightly lower power factor. However, if one adopts the V-/U-shape rare earth magnet design, it is shown that an 80% torque improvement and comparable power factor can be obtained. These results draw the conclusion that the new alternating rotor leakage flux blocking topology shows considerable promise in low and medium speed applications both as a motor or generator.Keywords
This publication has 8 references indexed in Scilit:
- A Spoke-Type IPM Machine With Novel Alternate Airspace Barriers and Reduction of Unipolar Leakage Flux by Step-Staggered RotorIEEE Transactions on Industry Applications, 2016
- Analysis of a PM Vernier Motor With Spoke StructureIEEE Transactions on Industry Applications, 2015
- High torque density ferrite permanent magnet vernier motor analysis and design with demagnetization consideration2015
- Influence of Pole Ratio and Winding Pole Numbers on Performance and Optimal Design Parameters of Surface Permanent-Magnet Vernier MachinesIEEE Transactions on Industry Applications, 2015
- Operation and Design Principles of a PM Vernier MotorIEEE Transactions on Industry Applications, 2014
- Generic torque-maximizing design methodology of surface permanent-magnet vernier machineIEEE Transactions on Industry Applications, 2000
- Theory and optimum design of PM Vernier motor1995
- Vernier Motor and Its DesignIEEE Transactions on Power Apparatus and Systems, 1963