Development of thermoplastic recycled blends from biomedical waste: evaluation of properties and value addition thereof
- 1 November 2022
- journal article
- research article
- Published by Wiley in Polymer International
- Vol. 72 (3) , 274-286
Abstract
The recycled polyolefin waste which included polypropylene (PP) and low‐density polyethylene (LDPE) were collected from hospital and subsequently sterilized by 1% sodium hypochlorite and followed by microwave disinfection. The sterilized BMW were analyzed for growth of pathogens if any. FTIR analysis was performed to analyze the composition of the waste as well as Carbonyl index to evaluate the extent of degradation post sterilization process. Recycled blends were prepared using melt extrusion technique and ethylene diene monomer was added to balance the interface between the varied polyolefin waste. Blends were studied for mechanical and morphological properties. Thermal analysis employed DSC revealed two different peaks of crystallization and melting revealing incompatibility in the blends. DMA showed reduction in the modulus with incorporation of LDPE and EPDM. SEM analysis confirmed the homogeneous distribution of RLD droplets with reduction in the interparticle distance indicates the partial miscibility. © 2022 Society of Industrial Chemistry.Keywords
This publication has 34 references indexed in Scilit:
- Characterization of polypropylene–polyethylene blends made of waste materials with compatibilizer and nano-fillerComposites Part B: Engineering, 2013
- Implications of LDPE Branching and Mw on Thermal and Mechanical Properties of PP/LDPE BlendsMacromolecular Symposia, 2008
- Degradation of polyethylene during extrusion. II. Degradation of low‐density polyethylene, linear low‐density polyethylene, and high‐density polyethylene in film extrusionJournal of Applied Polymer Science, 2003
- The effect of filler type, morphology and coating on the anisotropy and microstructure heterogeneity of injection-moulded discs of polypropylene filled with aluminium and magnesium hydroxides. Part 2. Thermal and dynamic mechanical propertiesPolymer, 2002
- Miscibility of blends of ethylene‐propylene‐diene terpolymer and polypropyleneJournal of Applied Polymer Science, 2001
- Mechanical properties and morphology of crosslinked PP/PE blends and PP/PE/propylene–ethylene copolymer blendsJournal of Applied Polymer Science, 1985
- Mechanical compatibilization of immiscible blendsPolymer Engineering & Science, 1984
- Tensile properties and morphology of blends of polyethylene and polypropyleneJournal of Applied Polymer Science, 1980
- Mechanical properties of polypropylene‐low density polyethylene blendsPolymer Engineering & Science, 1980
- Polymer crystallinity determinations by DSCThermochimica Acta, 1970