Development of Viscoelastic Multi-Body Simulation and Impact Response Analysis of a Ballasted Railway Track under Cyclic Loading
Open Access
Abstract
Simulation of a large number of deformable bodies is often difficult because complex high-level modeling is required to address both multi-body contact and viscoelastic deformation. This necessitates the combined use of a discrete element method (DEM) and a finite element method (FEM). In this study, a quadruple discrete element method (QDEM) was developed for dynamic analysis of viscoelastic materials using a simpler algorithm compared to the standard FEM. QDEM easily incorporates the contact algorithm used in DEM. As the first step toward multi-body simulation, the fundamental performance of QDEM was investigated for viscoelastic analysis. The amplitude and frequency of cantilever elastic vibration were nearly equal to those obtained by the standard FEM. A comparison of creep recovery tests with an analytical solution showed good agreement between them. In addition, good correlation between the attenuation degree and the real physical viscosity was confirmed for viscoelastic vibration analysis. Therefore, the high accuracy of QDEM in the fundamental analysis of infinitesimal viscoelastic deformations was verified. Finally, the impact response of a ballast and sleeper under cyclic loading on a railway track was analyzed using QDEM as an application of deformable multi-body dynamics. The results showed that the vibration of the ballasted track was qualitatively in good agreement with the actual measurements. Moreover, the ballast layer with high friction reduced the ballasted track deterioration. This study suggests that QDEM, as an alternative to DEM and FEM, can provide deeper insights into the contact dynamics of a large number of deformable bodies.Keywords
This publication has 37 references indexed in Scilit:
- Lattice Discrete Particle Model (LDPM) for failure behavior of concrete. I: TheoryCement and Concrete Composites, 2011
- Lattice Discrete Particle Model (LDPM) for failure behavior of concrete. II: Calibration and validationCement and Concrete Composites, 2011
- Application of Taguchi methods to DEM calibration of bonded agglomeratesPowder Technology, 2011
- Parallel-vector algorithms for particle simulations on shared-memory multiprocessorsJournal of Computational Physics, 2011
- 3D lattice type fracture model for concreteEngineering Fracture Mechanics, 2003
- Wave propagation in 3D spherical sections: effects of subduction zonesPhysics of the Earth and Planetary Interiors, 2002
- Fracture analyses using spring networks with random geometryEngineering Fracture Mechanics, 1998
- Modelling of Railway Track and Vehicle/Track Interaction at High FrequenciesVehicle System Dynamics, 1993
- DISCONTINUOUS DEFORMATION ANALYSIS: A NEW NUMERICAL MODEL FOR THE STATICS AND DYNAMICS OF DEFORMABLE BLOCK STRUCTURESEngineering Computations, 1992
- A discrete numerical model for granular assembliesGéotechnique, 1979