Corrosion behavior of HDA (hot-dip aluminized) carbon steel C45 half immersed in molten salts (NaCl, Na 2 SO 4 ) isothermally at 973 K
- 27 December 2022
- journal article
- research article
- Published by Taylor & Francis in Journal of Adhesion Science and Technology
- Vol. 37 (20) , 2807-2827
Abstract
Aluminized carbon steel C45 samples of 0.44 wt.% carbon content were immersed half in a molten salt mixture (NaCl + Na2SO4 with a ratio of 1:3) at a temperature of around 973 K over three different exposure periods: 8, 24, and 72 h. It was observed that a new intermetallic layer (emergent layer) formed at the interface between the steel substrate and the pre-formed intermetallic layers as a result of further outward and inward diffusion of Al, Fe, and C, as indicated by a metallographic study involving SEM combined with EDS spot analysis and elemental analysis. It was also observed that flake-like new phases precipitated in both halves, largely composed of Fe–Al–C–O elementary components, where presumably, the steel C45's high carbon content and the prolonged exposure to high temperatures contributed to further chemical reactions between the elements of HDA specimens and the molten salts’ aggressive Cl and S elements. Moreover, they accelerated the rate of oxidation/corrosion of the hot-dip aluminized C45 steel specimens at high temperatures. Gibbs free energies calculations of some of the corrosion products confirmed the composition of the oxide scale detected experimentally.Keywords
This publication has 27 references indexed in Scilit:
- The dependence of high temperature resistance of aluminized steel exposed to water-vapour oxidationSurface and Coatings Technology, 2010
- The high-temperature oxidation behavior of hot-dipping Al–Si coating on low carbon steelSurface and Coatings Technology, 2006
- Effects of carbon content of carbon steel on its dissolution into a molten aluminum alloyMaterials Science and Engineering: A, 2005
- Corrosion of carbon steel with NaCl coating in an atmosphere produced by burning emulsified diesel oilMaterials Chemistry and Physics, 2003
- Comparative study of high temperature oxidation behaviour in AISI 304 and AISI 439 stainless steelsMaterials Research, 2003
- The corrosion of Ni3Al in a combustion gas with and without Na2SO4-NaCl deposits at 600?800 COxidation of Metals, 1994
- Effects of Chromate and Vanadate Anions on the Hot Corrosion of Preoxidized Ni by a Thin Fused Na2 SO 4 Film at 900°CJournal of the Electrochemical Society, 1990
- On the formation of porosity and microchannels in growing scalesOxidation of Metals, 1985
- The corrosion behaviour of iron in hydrogen chloride gas and gas mixtures of hydrogen chloride and oxygen at high temperaturesCorrosion Science, 1981
- The distribution of cations in metal oxide and metal sulphide solid solutions formed during the oxidation of alloysCorrosion Science, 1969