Spark Plasma Sintering of Nanosized Amorphous Silicon Nitride Powder with a Small Amount of Sintering Additive
Authors:
- 2 June 2010
- journal article
- research article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 93 (6) , 1544-1546
Abstract
Dense and fine‐grained β‐Si 3 N 4 ceramics were successfully obtained with a small amount of sintering additives, 1.5 mass% Y 2 O 3 and 0.5 mass% Al 2 O 3 , using nanosized amorphous Si 3 N 4 powder by spark plasma sintering at temperatures of 1500°–1800°C and a pressure of 30 MPa under N 2 . The β‐Si 3 N 4 ceramics were composed of equiaxed grains with an average size of 300 nm. A higher sintering temperature was required for the densification of submicrometer‐sized α‐Si 3 N 4 powder with the small amount of the additives. The use of nanosized amorphous Si 3 N 4 powder accelerated the densification and the transformation to the β‐phase.Keywords
This publication has 15 references indexed in Scilit:
- Effect of AlN additive on densification, microstructure and strength of liquid-phase sintered SiC ceramics by spark plasma sinteringJournal of the Ceramic Society of Japan, 2009
- Nanostructure control of liquid-phase sintered Si3N4 ceramics by spark plasma sinteringJournal of the Ceramic Society of Japan, 2009
- Densification and microstructure of Al2O3-cBN composites prepared by spark plasma sinteringJournal of the Ceramic Society of Japan, 2008
- Densification and grain growth in pulse electric current sintering of aluminaJournal of the European Ceramic Society, 2004
- Fabrication and Evaluation of Ca-α SiAlON Nano CeramicsKey Engineering Materials, 2003
- Pulsed Electric Current Sintering of Silicon NitrideJournal of the American Ceramic Society, 2003
- Spark Plasma Sintering of AluminaJournal of the American Ceramic Society, 2002
- Field‐Assisted Sintering of Nanocrystalline Titanium NitrideJournal of the American Ceramic Society, 2000
- Very Rapid Densification of Nanometer Silicon Carbide Powder by Pulse Electric Current SinteringJournal of the American Ceramic Society, 2000
- Trends in Advanced SPS Spark Plasma Sintering Systems and Technology. Functionally Gradient Materials and Unique Synthetic Processing Methods from Next Generation of Powder Technology.Journal of the Society of Powder Technology, Japan, 1993