Measurements and predictions of diffusible hydrogen escape and absorption in catholically charged 316LN austenitic stainless steel
Open Access
- 29 June 2023
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 13 (1) , 1-14
Abstract
Hydrogen can have an impact on the service life of safety critical components, such as coolant pipes in nuclear reactors, where it may interact with other factors including irradiation. Hence, it is important to characterise such behaviour which in turn requires the capability to charge representative material specimens with hydrogen and to quantity the levels of hydrogen present. Hydrogen concentrations resulting from cathodic charging of 316LN stainless steel over short time periods (< 2 h) were estimated from hydrogen release rates obtained from potentiostatic discharge measurements and used to calibrate simulations based on Fick’s second law of diffusion in order to predict the hydrogen concentration after 24 h of charging. Leave-one-out cross-validation was used to establish confidence in results which were also validated using measurements from the melt extraction technique. The success of Fick’s second law for estimating escape rates showed that a majority of the absorbed hydrogen was diffusible rather than trapped. These results confirmed that the potentiostatic discharge technique can be used on materials with low diffusivity, and provide a new method through which hydrogen concentrations within a sample can be estimated after cathodic charging non-destructively without the need to remove samples from solution.Keywords
Funding Information
- Engineering and Physical Sciences Research Council
This publication has 45 references indexed in Scilit:
- Hydrogen Solubility and Diffusion in Austenitic Stainless Steels Studied with Thermal Desorption SpectroscopySteel Research International, 2010
- Determination of diffusible and total hydrogen concentration in coated and uncoated steel using melt and solid extraction techniques: Part ITalanta, 2010
- Absorption of hydrogen in tensile strained iron and high-carbon steel studied by electrochemical permeation and desorption techniquesInternational Journal of Hydrogen Energy, 2009
- Chapter 26—Environmental Cracking-Corrosion Fatigue2009
- Effects of hydrogen on fatigue crack growth behavior of austenitic stainless steelsInternational Journal of Hydrogen Energy, 2008
- Recent Development in Hydrogen Microprint Technique and Its Application to Hydrogen EmbrittlementISIJ International, 2003
- Removal of dissolved oxygen from water: A comparison of four common techniquesTalanta, 1994
- The effect of prior mechanical deformation on hydrogen transport through 13% chromium martensitic stainless steelCorrosion Science, 1992
- Hydrogen transport and solubility in 316L and 1.4914 steels for fusion reactor applicationsJournal of Nuclear Materials, 1988
- The equivalent pressure of molecular hydrogen in cavities within metals in terms of the overpotential developed during the evolution of hydrogenElectrochimica Acta, 1971