Experimental investigation of specific heat of aqueous graphene oxide Al2O3 hybrid nanofluid
Open Access
- 1 January 2021
- journal article
- research article
- Published by National Library of Serbia in Thermal Science
- Vol. 25 (1 Part B) , 515-525
Abstract
The specific heat of aqueous graphene+Al2O3 (1:1) hybrid nanofluid was measured using the cooling method. The influence of nanoparticle mass fraction and temperature on the specific heat capacity of the hybrid nanofluids was investigated, the specific heat of the hybrid nanofluid was compared with that of aqueous graphene oxide nanofluid and Al2O3 nanofluid. A fitted formula of the specific heat of the hybrid nanofluid was proposed based on the experimental data. It indicates that the specific heat reduction ratio increases with increase of nanoparticle fraction and the maximum reduction ratio is 7% at 0.15 wt.% at 20?C. The mass fraction of nanoparticle affects the specific heat of hybrid nanofluid more significantly at lower temperature. Temperature impacts the specific heat more distinctly than the nanoparticle fraction. The specific heat increases with temperature and the maximum specific heat reduction ratio of the hybrid nanofluid diminishes from 7% at 20?C to 2% at 70?C at the mass fraction of 0.05%.Keywords
This publication has 39 references indexed in Scilit:
- Tungsten (III) oxide (WO 3 ) – Silver/transformer oil hybrid nanofluid: Preparation, stability, thermal conductivity and dielectric strengthAlexandria Engineering Journal, 2018
- Novel hybrid nanofluid with tunable specific heat and thermal conductivity: Characterization and performance assessment for energy related applicationsEnergy, 2017
- Investigation of specific heat and latent heat enhancement in hydrate salt based TiO2 nanofluid phase change materialApplied Thermal Engineering, 2017
- Thermal conductivity of Al 2 O 3 + TiO 2 /water nanofluid: Model development and experimental validationApplied Thermal Engineering, 2017
- Stability, thermal conductivity, and rheological properties of controlled reduced graphene oxide dispersed nanofluidsApplied Thermal Engineering, 2017
- Comparison of Electrocalorimetric and Cooling Methods to Determine Specific Heat of Aqueous Solutions of the Sodium Salt CarboxymethylcelluloseArabian Journal for Science and Engineering, 2015
- Effect of water based Al 2 O 3 nanoparticle PCM on cool storage performanceApplied Thermal Engineering, 2015
- Thermal conductivity and specific heat capacity measurements of Al2O3 nanofluidsJournal of Thermal Analysis and Calorimetry, 2012
- Avoiding error of determining the martensite finish temperature due to thermal inertia in differential scanning calorimetry: model and experiment of Ni–Ti and Cu–Al–Ni shape memory alloysJournal of Materials Science, 2011
- Some interpretation problems of thermal studies of the reversible martensitic transformationJournal of Materials Science, 1988