Inverse dynamic analysis and trajectory planning for flexible manipulator
Author:
- 1 January 2010
- journal article
- research article
- Published by Taylor & Francis in Inverse Problems in Science and Engineering
- Vol. 18 (4) , 549-566
Abstract
In this study, dynamic analysis and trajectory planning for a rigid-flexible manipulator is considered. The manipulator under consideration consists of two links–the first link is rigid while the second link is flexible. Euler–Bernoulli's beam theory is utilized to model the elastic link, where shear deformation and rotary inertia can be neglected if the cross-sectional area is small compared to the length of the beam. The tangential coordinate frame is employed to describe the elastic deflection of the flexible link. The equations of motion of the manipulator are derived using the extended Hamilton's principle. The joints trajectory will be designed based on four different trajectories and the joints torques required to move the end effector according to a prescribed trajectory will be obtained through the solution of the inverse dynamics problem. To validate the applicability of soft motion trajectory for flexible manipulators, a comparison with other standard trajectories is carried out for the first three mode shapes of vibration of the flexible link.Keywords
This publication has 13 references indexed in Scilit:
- Dynamic analysis of flexible manipulators, a literature reviewMechanism and Machine Theory, 2006
- 514 Trajectory Planning for Residual Vibration Suppression of a Two-Link Rigid-Flexible ManipulatorThe Proceedings of the Dynamics & Design Conference, 2006
- Soft Motion Trajectory for Planar Redundant Manipulator2006
- Dynamic Analysis of a Rigid-Flexible Manipulator Constrained by Arbitrary Shaped SurfacesInternational Journal of Modelling and Simulation, 2005
- Dynamic modelling of a rigid-flexible manipulator for constrained motion task controlApplied Mathematical Modelling, 1999
- Modeling of flexible-link manipulators with prismatic jointsIEEE Transactions on Systems, Man, and Cybernetics, Part B (Cybernetics), 1997
- Modeling and quasi-static hybrid position/force control of constrained planar two-link flexible manipulatorsIEEE Transactions on Robotics and Automation, 1994
- On the Stability of PD Control for a Two-Link Rigid-Flexible ManipulatorJournal of Dynamic Systems, Measurement, and Control, 1994
- Dynamic Modeling of Constrained Flexible Robot Arms for Controller DesignJournal of Dynamic Systems, Measurement, and Control, 1994
- A Lagrangian Formulation of the Dynamic Model for Flexible Manipulator SystemsJournal of Dynamic Systems, Measurement, and Control, 1988