Additive Conformational Engineering To Improve the PbI2 Framework for Efficient and Stable Perovskite Solar Cells
- 15 August 2023
- journal article
- research article
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 62 (34) , 14086-14093
Abstract
This study reveals that the molecularconformation of theadditives makes a nonnegligible effect on the PbI2 filmsand the final perovskite solar cells (PSCs) performance. The spatiallysymmetrical biuret additive contributes to the improved crystallinityof PbI2 film, while the asymmetrical dithiobiuret additivealmost destroys the PbI2 film. Therefore, the biuret-modifiedPSCs via a two-step deposition method achieve an enhanced power conversionefficiency of 22.7%, negligible hysteresis, and prolonged stability. The PbI2 framework is critical for two-stepfabricatedperovskite solar cells. This study investigates the effects of introducingtwo functional urea-based molecules, biuret (BU) and dithiobiuret(DTBU), into the PbI2 precursor solution on the absorberlayer and overall device performance. BU, which contains C O,enhanced device performance and stability, whereas DTBU, which containsC S, had negative effects. Research analysis revealed the differencesin the spatial structures of the two urea-based molecules. The introductionof symmetrical BU molecules facilitated the crystallization of PbI2, whereas the introduction of DTBU with a twisted molecularstructure led to inferior crystallization performance of PbI2. The perovskite thin film, obtained by introducing BU into the PbI2 precursor solution, demonstrated superior performance, characterizedby a decreased defect density and an extended carrier lifetime. Thedevice performance and stability were enhanced, resulting in higheropen-circuit voltage and fill factor. The highest achieved power conversionefficiency was 23.50%. After 1300 h of storage under unpackaged conditionsat 30-40% humidity, the devices maintained 93% of their initialefficiency. Conversely, the devices prepared with DTBU doping exhibitedinferior performance and stability, displaying power conversion efficiencybelow 10% and faster degradation under the same humidity conditions.Keywords
Funding Information
- China Postdoctoral Science Foundation (2021M700571, 2022T150769)
- Ministry of Education ??? Kingdom of Saudi Arabi (IFKSUOR3-073-1)
- National Natural Science Foundation of China (62004019)
This publication has 32 references indexed in Scilit:
- On the structure and physical properties of methyl ammonium lead iodide perovskite thin films by the two-step deposition methodMaterials Chemistry and Physics, 2018
- Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cellsScience, 2017
- Defect passivation in hybrid perovskite solar cells using quaternary ammonium halide anions and cationsNature Energy, 2017
- Enhanced electron extraction using SnO2 for high-efficiency planar-structure HC(NH2)2PbI3-based perovskite solar cellsNature Energy, 2016
- Fabrication of organic-inorganic perovskite thin films for planar solar cells via pulsed laser depositionAIP Advances, 2016
- Growth of CH3NH3PbI3 cuboids with controlled size for high-efficiency perovskite solar cellsNature Nanotechnology, 2014
- Retarding the crystallization of PbI 2 for highly reproducible planar-structured perovskite solar cells via sequential depositionEnergy & Environmental Science, 2014
- Planar Heterojunction Perovskite Solar Cells via Vapor-Assisted Solution ProcessJournal of the American Chemical Society, 2013
- Using a two-step deposition technique to prepare perovskite (CH3NH3PbI3) for thin film solar cells based on ZrO2 and TiO2 mesostructuresRSC Advances, 2013
- Sequential deposition as a route to high-performance perovskite-sensitized solar cellsNature, 2013