Machining of Triangular Holes in D2 Steel by the Use of Non-Conventional Electrodes in Die-Sinking Electric Discharge Machining
Open Access
Abstract
Electric discharge machining is relatively a slow process in terms of machining time and material removal rate. The presence of overcut and the hole taper angle caused by the excessive tool wear are other challenges in the electric discharge machining die-sinking process. The areas of focus to solve these challenges in the performance of electric discharge machines include increasing the rate of material removal, decreasing the rate of tool wear, and reducing the rate of hole taper angle and overcut. Triangular cross-sectional through-holes have been produced in D2 steel through die-sinking electric discharge machining (EDM). Conventionally, the electrode with uniform triangular cross-section throughout the electrode length is used to machine triangular holes. In this study, new designs of electrodes (non-conventional designs) are employed by introducing circular relief angles. For material removal rate (MRR), tool wear rate (TWR), overcut, taper angle, and surface roughness of the machined holes, the machining performance of conventional and unconventional electrode designs is compared. A significant improvement in MRR (32.6% increase) has been achieved by using non-conventional electrode designs. Similarly, the hole quality resulted by non-conventional electrodes is way better than hole quality corresponding to conventional electrode designs, especially in terms of overcut and hole taper angle. A reduction of 20.6% in overcut and a reduction of 72.5% in taper angle can be achieved through newly designed electrodes. Finally, one electrode design has been selected (electrode with 20 degree relief angle) as the most appropriate electrode resulting in better EDM performance in terms of MRR, TWR, overcut, taper angle, and surface roughness of triangular holes.Keywords
Funding Information
- King Saud University (RSPD2023R701)
This publication has 28 references indexed in Scilit:
- Investigation of the effects of ultrasonic assisted drilling on tool wear and optimization of drilling parametersCIRP Journal of Manufacturing Science and Technology, 2020
- Experimental investigations on magnetic field-assisted micro-electric discharge machining of inconel alloyInternational Journal of Ambient Energy, 2020
- Improving the Performance of EDM through Relief-Angled Tool DesignsApplied Sciences, 2020
- Principles and Characteristics of Different EDM Processes in Machining Tool and Die SteelsApplied Sciences, 2020
- Modeling of Interelectrode Gap in Electric Discharge Machining and Minimum Variance Self-Tuning Control of Interelectrode GapMathematical Problems in Engineering, 2020
- Two-step optimization of electric discharge machining using neural network based approach and TOPSISJournal of Interdisciplinary Mathematics, 2020
- Machinability of titanium alloy through electric discharge machiningMaterials and Manufacturing Processes, 2018
- Experimental Investigation of Magnetic Field Assisted Powder Mixed Electric Discharge MachiningParticulate Science and Technology, 2015
- Parametric Evaluation on Near-Dry Electric Discharge MachiningMaterials and Manufacturing Processes, 2015
- Electrical Discharge Machining of AISI 329 Stainless Steel Using Copper and Brass Rotary Tubular ElectrodeProcedia Materials Science, 2014