Modeling of the dynamic inelasticity of tantalum single crystal under ramp wave loading
Authors:
- 15 April 2011
- journal article
- conference paper
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 109 (8) , 083505
Abstract
In a previous study, the behavior of single crystal tantalum under ramp wave loading along the [100] and [110] orientations was characterized. The principal objective of the present study is to gain some insights on the observed single crystal behavior particularly on its precursor response and strong orientation dependence, and the implication of the macroscopic behavior on the possible underlying deformation mechanisms. The approach used to achieve this objective is through the material model development and numerical simulation. A continuum model developed in a previous work for polycrystalline tantalum was first modified to describe the experimental data and extract the material information associated with the data. A rigorous finite deformation single crystal model based on dislocation slip was then developed to gain physical insights into the possible deformation mechanisms. The slip systems considered were the {110}〈111〉 and {112}〈111〉 systems. Dislocation density and its evolution by nucleation or multiplication were incorporated as a key mechanism for describing the precursor behavior in both models. The orientation dependence was modeled through the assumption of anisotropic dislocation nucleation. In the continuum model, different nucleation rates were assumed for the [100] and [110] orientation. In the single crystal model, this anisotropy is assumed to be associated with the twinning/antitwinning asymmetry of the BCC crystals. The precursor for the [100] orientation is attributed mainly to the slips along the antitwinning direction and that for the [110] is to the slips along the twinning direction. The anisotropic dislocation nucleation leads to the orientation dependence of the rate sensitivity of single crystal Ta and the subsequent deformation behavior. Both models were demonstrated to be able to generate reasonably consistent results and to capture the observed material features. Through the developed models, a reasonable understanding was achieved for the evolution of stress, strain, strain rates, strength, temperature, and stress strain relations for single crystal tantalum under ramp wave loading and the possible correlation between the macroscopic behavior and microscopic deformation mechanisms.Keywords
This publication has 35 references indexed in Scilit:
- Dynamic yielding of single crystal Ta at strain rates of ∼5 × 105/sJournal of Applied Physics, 2011
- Anisotropic material model and wave propagation simulations for shocked pentaerythritol tetranitrate single crystalsJournal of Applied Physics, 2010
- Modeling of the elastic precursor behavior and dynamic inelasticity of tantalum under ramp wave loading to 17 GPaJournal of Applied Physics, 2010
- Numerical study of rate-dependent strength behavior under ramp and shock wave loadingInternational Journal of Plasticity, 2009
- A plasticity model describing yield-point phenomena of steels and its application to FE simulation of temper rollingInternational Journal of Plasticity, 2008
- BCC single crystal plasticity modeling and its experimental identificationModelling and Simulation in Materials Science and Engineering, 2008
- Nonlinear anisotropic description for the thermomechanical response of shocked single crystals: Inelastic deformationJournal of Applied Physics, 2006
- Non-schmid yield behavior in single crystalsJournal of the Mechanics and Physics of Solids, 1992
- Phase transitions under shock-wave loadingReviews of Modern Physics, 1977
- Laser interferometer for measuring high velocities of any reflecting surfaceJournal of Applied Physics, 1972