Geometrical and Material Characterization of Quenched and Self-Tempered Steel Reinforcement Bars
- 1 June 2016
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 28 (6)
Abstract
Quenched and self-tempered (QST) steel reinforcement bars (rebars) are manufactured by Thermex or Tempcore processes. Characterization studies of QST rebars are mostly limited to reveal the hardened outer layer and some improved mechanical properties compared to hot-rolled (HR) and cold-worked (CW) rebars. However, investigations on residual stresses and imperfections originating from the manufacturing process as well as stress concentrations arising from the ribbed profile are rarely found in the literature. Surface residual stress may be beneficial or detrimental to the fatigue performance of rebars although they have been studied only on the subsurface of QST rebars. Surface imperfections are zones of stress concentration from where fatigue cracks may initiate. Imperfections are usually identified in the fractured cross section resultant from fatigue tests of rebars. Stress concentrations can also arise from the rib geometry. Although the rib geometric parameters affect the stress concentration...Keywords
This publication has 12 references indexed in Scilit:
- Prediction of hardness of the tempered martensitic rim of TMT rebarsMaterials Science and Engineering: A, 2012
- Construction Materials2010
- A Step towards a Complete Uncertainty Analysis of Residual Stress Determination Using Neutron DiffractionMaterials Science Forum, 2010
- Improvement of mechanical properties of reinforcing steel used in the reinforced concrete structuresJournal of Iron and Steel Research International, 2009
- Recent advances in residual stress measurementInternational Journal of Pressure Vessels and Piping, 2008
- Near-Surface Stress Measurement in 2D and 3D by the Cut Compliance TechniqueMaterials Science Forum, 2002
- Metallographer’s Guide2002
- Residual Stress Measurement in Cracked Components: Capabilities and Limitations of the Cut Compliance MethodMaterials Science Forum, 2000
- Microstructure and properties of thermomechanically strengthened reinforcement bars: a comparative assessment of plain-carbon and low-alloy steel gradesJournal of Materials Engineering and Performance, 1997
- FATIGUE OF STEEL REINFORCEMENT BARS IN CONCRETE: A REVIEWFatigue & Fracture of Engineering Materials & Structures, 1979