Load and response quantification of direct fixation fastening systems for heavy rail transit infrastructure
- 11 January 2021
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit
- Vol. 235 (9) , 1110-1121
Abstract
Ballastless track (i.e. slab track) systems are used extensively in passenger rail applications for improved track stability, alignment control, vibration, and life cycle cost (LCC) benefits. These systems regularly rely on Direct Fixation (DF) fasteners to connect the rail to the structure. Field performance observations have indicated that even under similar track geometry and train operating conditions, the DF fasteners useful life varies widely. Meanwhile, a review of literature reveals that there is limited prior research to guide optimization of DF fastener designs for heavy rail transit. Therefore, researchers at the University of Illinois at Urbana-Champaign (UIUC) conducted a field investigation at three sites on a United States legacy heavy rail transit system to quantify wheel-rail interface loading demands and DF fastener response. Track response variance across similar track geometry was found. Wheel loads ranged between 2.7 to 18.2 kip (12.0 to 81.0 kN) and 0.9 to 12.4 kip (4.0 to 55.2 kN) for vertical and lateral loads, respectively. Lateral rail head displacements ranged between −0.05 to 0.16 inches (−1.27 to 4.06 mm) while dynamic lateral stiffness ranged from 42 to 62 kip/in. (7.3 to 10.8 kN/mm), indicating a low stiffness ratio for the DF fastener studied. Differences in behavior are attributed to dynamic vehicle-track interaction, the relationship between balanced and operating speeds, and differences in track gauge between sites. A comparison of vertical loading results with two additional heavy rail transit agencies shows Burr distributions that accurately represent the loading demands. Results from this study provide quantitative information that can be leveraged to improve heavy rail transit DF fastening system design and development of representative design validation testing protocols.Keywords
Funding Information
- Washington Metropolitan Area Transit Authority (CQ17066/LTR)
This publication has 7 references indexed in Scilit:
- Probabilistic framework for the assessment of the flexural design of concrete sleepersProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2019
- Quantification of rail transit wheel loads and development of improved dynamic and impact loading factors for designProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2018
- Quantifying Bending Moments in Rail-Transit Concrete SleepersJournal of Transportation Engineering, Part A: Systems, 2018
- Load quantification of the wheel–rail interface of rail vehicles for the infrastructure of light rail, heavy rail, and commuter rail transitProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2017
- Evaluation of dynamic and impact wheel load factors and their application in design processesProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2016
- Nonparametric Statistics with Applications to Science and Engineering2007
- Direct-Fixation Track Design Specifications, Research, and Related Material2005