An investigation of the properties of conventional and severe shot peened low alloy steel
- 1 July 2017
- journal article
- Published by IOP Publishing in Materials Research Express
- Vol. 4 (7) , 076501
Abstract
The effects of the conventional shot peening and severe shot peening process on the mechanical and tribological properties of shot peened AISI 4340 high strength steel were systematically investigated. Compared with the conventional shot peened sample, the ultrafine grain surface layer with a depth of about 20 µm generated by the severe shot peening process can enhance the hardness and wear resistance of the treated material. However, deeper dimples generated by the high media velocity in the severe shot peening process resulted in a higher surface roughness, which is considered as a side effect of this method reducing the fatigue life of the material. Applying a smaller shot size with an appropriate intensity can be used to peen the severe shot peened samples to not only reduce the surface roughness and friction coefficient but also improve the wear resistance for these samples.Keywords
This publication has 18 references indexed in Scilit:
- Mechanical and Tribological Properties of Shot-Peened SAE 1070 SteelTribology Transactions, 2016
- Friction and wear behavior of shot peened surfaces of 36CrNiMo4 and 36NiCrMo16 alloyed steels under dry and lubricated contact conditionsApplied Surface Science, 2014
- Wear behaviour of low carbon steel after severe shot peeningMaterials Research Innovations, 2013
- Review of shot peening processes to obtain nanocrystalline surfaces in metal alloysSurface Engineering, 2009
- Improvement of tribological performance of steel by solid lubricant shot-peening in dry rolling/sliding contact wear testsWear, 2006
- Nanostructuring of metals by severe plastic deformation for advanced propertiesNature Materials, 2004
- Nanostructured surface layer on metallic materials induced by surface mechanical attrition treatmentMaterials Science and Engineering: A, 2004
- Surface Modifications in Aerospace ApplicationsSurface Engineering, 2001
- Principles of abrasive wearWear, 1974
- The wear of metals by hard abrasivesWear, 1967