Construction of an Omnidirectional Parametric Loudspeaker Consisting in a Spherical Distribution of Ultrasound Transducers
Open Access
Abstract
Omnidirectional sound sources are needed to perform a large variety of tests in acoustics. Typically, they consist of conventional speaker drivers arranged in a dodecahedron. However, the directivity of the speaker drivers sharpens with frequency, which induces an intense decrease of the sound pressure levels at the edges of the dodechaedron. In this work, the problem is mitigated by building an Omnidirectional Parametric Loudspeaker (OPL), which contains hundreds of small ultrasound transducers set on a sphere. Each transducer emits an ultrasonic carrier wave modulated by an audible signal. Thanks to nonlinear propagation, the air itself demodulates the signal bringing it back to the audible range. The construction of an OPL prototype is challenging. The structure has been built by 3D-printing a set of pieces that conform to the sphere. Each piece contains the exact location of the transducers, which are aligned in parallels to facilitate the structural assembly and the wiring. The performance of the OPL has been tested in an anechoic chamber. Measurements show that the OPL has a good omnidirectional behavior for most frequencies. It clearly improves the directivity of dodechaedral sources in the high frequency range, but performs worse at low frequencies.Keywords
Funding Information
- Horizon 2020 Framework Programme (637221)
- Universitat Ramon Llull (2017-URL-Proj-015)
This publication has 28 references indexed in Scilit:
- Low Cost Omnidirectional Sound Source Utilizing a Common Directional Loudspeaker for Impulse Response MeasurementsApplied Sciences, 2018
- Hemispherical breathing mode speaker using a dielectric elastomer actuatorThe Journal of the Acoustical Society of America, 2015
- An analytical model for a dodecahedron loudspeaker applied to the design of omni-directional loudspeaker arraysApplied Acoustics, 2014
- Influence of “omnidirectional” loudspeaker directivity on measured room impulse responsesThe Journal of the Acoustical Society of America, 2013
- A lightweight push-pull acoustic transducer composed of a pair of dielectric elastomer filmsThe Journal of the Acoustical Society of America, 2013
- Optimizing stepwise rotation of dodecahedron sound source to improve the accuracy of room acoustic measuresThe Journal of the Acoustical Society of America, 2013
- Impulse source versus dodecahedral loudspeaker for measuring parameters derived from the impulse response in room acousticsThe Journal of the Acoustical Society of America, 2013
- An optoacoustic point source for acoustic scale model measurementsThe Journal of the Acoustical Society of America, 2013
- An experimental evaluation of regular polyhedron loudspeakers as omnidirectional sources of soundThe Journal of the Acoustical Society of America, 2006
- Directional characteristics of pulse sound source with spark discharge.Acoustical Science and Technology, 1985