Finite element mesh improvement using an a priori local p-refinement for stress analysis of underground excavations
Authors:
Open Access
- 1 January 2020
- journal article
- other
- Published by Taylor & Francis in Cogent Engineering
- Vol. 7 (1)
Abstract
As our understanding and modeling capabilities evolve, an ever-increasing complexity of models representing the behaviour of geologic medium are analyzed. One way to evaluate these substantial problems is to optimize the underlying discretization of the governing differential equations by concentrating finite elements where solution accuracy counts the most. This paper develops and evaluates the performance of a priori local p-refinement method for finite element mesh improvement for stress analysis of underground excavations. This type of refinement entails a mesh with higher-order elements near the region of interest and lower-order elements elsewhere. The focus of the paper is the automated insertion of transitional elements at the interface of the two regions. The method relies on transitional finite elements in order to connect a mesh of quadratic interpolation order elements with a mesh of linear interpolation order elements. Four types of transitional elements were considered (4-node and 5-node triangles, 5-node and 7-node quadrilaterals). These were incorporated into a finite element code, and their performance was tested using representative problems such as a pressurized cavity or tunnelling through rock. For these problems the global stiffness matrix size was reduced on average by 85% and by 81% for the models using triangles and quadrilaterals, respectively, as a result, the calculation times were considerably shortened as well. While the average percentage of error with respect to the models without improvement, measured at critical points, was 0.04% and 0.02% in the case of triangular and quadrilateral elements, respectively.Keywords
Funding Information
- Natural Sciences and Engineering Research Council of Canada (N01088)
This publication has 11 references indexed in Scilit:
- Finite Element Mesh Smoothing Using Cohort Intelligence2018
- An h-adaptive numerical manifold method for solid mechanics problemsScience China Technological Sciences, 2017
- Large deformation analysis of geomechanics problems by a combined rh-adaptive finite element methodComputers and Geotechnics, 2013
- A framework for automatic modeling of underground excavations and optimizing three‐dimensional boundary and finite element meshes derived from them—frameworkInternational Journal for Numerical and Analytical Methods in Geomechanics, 2012
- A Modified Nonconforming 5-Node Quadrilateral Transition Finite ElementAdvances in Applied Mathematics and Mechanics, 2010
- A continuum mechanics-based framework for optimizing boundary and finite element meshes associated with underground excavations-frameworkInternational Journal for Numerical and Analytical Methods in Geomechanics, 2005
- A continuum mechanics based framework for optimizing boundary and finite element meshes associated with underground excavations—accuracy, efficiency and applicationsInternational Journal for Numerical and Analytical Methods in Geomechanics, 2005
- A continuum mechanics-based framework for boundary and finite element mesh optimization in two dimensions for application in excavation analysisInternational Journal for Numerical and Analytical Methods in Geomechanics, 2005
- A simple error estimator and adaptive procedure for practical engineerng analysisInternational Journal for Numerical Methods in Engineering, 1987
- A finite element for transition from a fine to a coarse gridInternational Journal for Numerical Methods in Engineering, 1978