Immobilization of an organophosphorus compound on polypropylene‐g‐poly(glycidyl methacrylate) polymer support and its application in scandium recovery
- 31 August 2021
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 139 (6) , 51597
Abstract
Scandium is a rare earth element that has a wide range of uses in modern technology. The conventional recovery of scandium is commonly done by solvent extraction using organophosphorus compounds. This process however produces a lot of waste extractants. To circumvent this challenge, a model organophosphorus compound phenylphosphinic acid (PPI) was immobilized to a polymer support fabric to produce a Sc(III) adsorbent for high throughput scandium recovery with less waste generation. Polymer support (PP‐g‐PGMA) for the organophosphorus compound was synthesized using radiation‐induced graft polymerization. Successful post‐polymer modification of the PGMA grafts to attach PPI groups was carried out using 1 M PPI in isopropanol at 80°C for 4 h, achieving a maximum functional group density of 1.32 mmol/g. The obtained PP‐g‐PGMA‐PPI fabrics were used in the batch Sc(III) adsorption experiments. The results showed that PP‐g‐PGMA‐PPI effectively adsorbed low concentrations of Sc(III) at a pH of at least 2.0. More than 98% adsorption was achieved using 1 ppm Sc(III). The synthesized adsorbent was also shown to be selective for Sc(III) even in the presence of Fe(III) and Al(III) ions. PP‐g‐PGMA‐PPI adsorbent fabrics are therefore promising alternatives to solvent extraction methods and ion‐exchange granular resin technologies in the recovery of scandium.Keywords
Funding Information
- Philippine Nuclear Research Institute
This publication has 42 references indexed in Scilit:
- Separation and purification of scandium by solvent extraction and related technologies: a reviewJournal of Chemical Technology & Biotechnology, 2011
- Synthesis of Poly(glycidyl methacrylate)‐block‐Poly(pentafluorostyrene) by RAFT: Precursor to Novel Amphiphilic Poly(glyceryl methacrylate)‐block‐Poly(pentafluorostyrene)Macromolecular Rapid Communications, 2008
- Selective Separation of Scandium(III) and Yttrium(III) from other Rare Earth Elements using Cyanex302 as an ExtractantSeparation Science and Technology, 2008
- The aqueous geochemistry of gallium, germanium, indium and scandiumOre Geology Reviews, 2006
- Recovery of scandium from magnesium, aluminium and iron scrapHydrometallurgy, 1997
- EXTRACTION MECHANISM OF Sc(III) AND SEPARATION FROM ThUV).Fe(III) AND Lu(III) WITH BIS(2,4,4-TRIMETHYLPENTYL)PHOS- PHINIC ACID IN N-HEXANE FROM SULPHURIC ACID SOLUTIONSSolvent Extraction and Ion Exchange, 1994
- Thermal degradation of poly(glycidyl methacrylate)Polymer Degradation and Stability, 1990
- Selective Recovery of Trace Scandium from Acid Aqueous Solution with (2-Ethylhexyl hydrogen 2-ethylhexylphosphonate)-Impregnated ResinAnalytical Sciences, 1989
- MECHANISM OF POLYMER-BASED SEPARATIONS. I. COMPARISON OF PHOSPHINIC ACID WITH SULFONIC ACID ION EXCHANGE RESINSSolvent Extraction and Ion Exchange, 1989
- Thermal degradation of polypropyleneJournal of Polymer Science, 1962